Recommended Trailer Hitch Receiver For 1998 Chevy K3500

Question

Question:

I am thinking about buying a friends 98 k3500. It does not have a hitch or plug on it. Why someone would not have one on a 3500 is a mystery to me. I am confused about harnesses. I know I need one for a brake controller but what and where do I start to go back with a harness from the cab to the back of the truck and possibly an extra plug in the box for a 5th wheel, just in case. Thank you.

asked by: David D

0

Expert Reply:

For a 1998 Chevrolet K Series 3500 Pickup, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41901. This is an extremely sturdy hitch that is easy to install. It will fit a standard or step bumper. For a roll-pan bumper, use # 41522.

For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118315 to get a 4 way connection. Then you will want to add the # ETBC7 to get your 7 way connection along with the circuit breakers, connectors, and wire. While you are at that, you may want to splice in the # 20023 to get that 7 way in the bed of your truck too.

For a brake controller, I recommend using the Tekonsha Prodigy P3 # 90195 which will give you an LCD screen, adjustability for your driving preferences and 3 levels of boost. Why not avoid having codes and use a system that can tell you what is happening in real time? This is a great option whether you are towing for the first time or the hundredth time this year.

For a ball mount, I recommend the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K # C45902. To secure your investment, I recommend using # C23556.

expert reply by: Jason S

0

Answer 1

The Draw-Tite #41901 will bolt up to the frame it is just a matter of fitting with that bumper. As long as you're willing to modify the bumper or swap it out to allow the hitch to fit you will be able to use this on your 1991 Chevy K3500.

view full answer...

Answer 2

The drop of the B & W Class V #BWHDRH25198 is 7-3/8 inches. That represents the distance from the underside of the frame member where the hitch mounts to the top of the receiver tube. If that isn't sufficient to clear your bumper, the Curt…

view full answer...

Answer 3

According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install…

view full answer...

Answer 4

If your Tekonsha P3 Brake Controller, part #90195, displays the error message OUTPUT SHORTED NO BRAKES, the potential causes are a short in the brake output circuit somewhere between the brake controller and the trailer brake assemblies, or a shorted…

view full answer...

Answer 5

It does sound like there is a possible short with the brake magnets on your trailer, especially if all the wiring looks good between the brake controller and vehicle connector. I recommend first making sure that each magnet has one wire secured to…

view full answer...

Answer 6

The 7-Way Pre-Wired Car Connector, 7 foot Lead, item #20023, has 7 wires. The white and black wires are 10 gauge, the blue wire is 12 gauge, and the brown, red, yellow and green wires are 14 gauge. The connector allows you to have your trailer wiring…

view full answer...

Answer 7

You might be able to use the Hopkins #41157 if your 7-way is capable of unplugging from the wiring harness. If you take a look at the install video for the 41157 (click provided link), you can see how the harness unplugs from the back of the 7-way.…

view full answer...

Answer 8

We have 7-Way Pre-Wired Car Connector #20023 that is 7 feet long. I have linked a video review of this product for you.

view full answer...

Answer 9

Sounds like you are looking for a 7-way that you can install in the bed of your truck so that the connector of your fifth wheel can easily connect to it. For a 7-way to install in the bed of your truck to make connecting your trailer lights easier…

view full answer...

Answer 10

The Draw-Tite 7-Way Pre-Wired Car Connector #20023 has a 7 foot lead, which should be plenty of length to work with the 8-foot bed of your 1990 Chevy C/K Series Pickup. The directions are straightforward and not particularly lengthy; I've sent…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Trailer Hitch Receiver For 1998 Chevy K3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching