Search: 3064   >  

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

The Replacement Oil Cap Kit part #K71-859-00 is correct for a Dexter 12,000 Lb Axle. The Replacement Oil Cap Kit comes with the o-ring, cap, and plug so you will be good to go. The thread size is an industry standard for Dexter 10,000 - 16,000 Lb…

The Dexter parts you've mentioned are the left and right brake shoe for a hydraulic brake that is 12-1/4" x 4". To replace those parts you can use the Replacement Hydraulic Shoe Lining for Dexter 10K Hydraulic Brakes - LH #BP04-340 and…

Yes, the Dexter E-Z Flex Suspension Kit #K71-657-00 is the correct kit to upgrade your triple axle trailer which currently utilizes the 13-126 equalizer. Both these are designed for axle spacings 35" apart.

Standard 5th wheel base rails have multiple hitch mounting holes spaced at different dimensions. Measured hole center to hole center these spreads are 10-inches, 20-1/2-inches or 29-inches. It certainly looks like your base rails are…

If the Pullrite Superglide you have was designed to fit the industry standard rails (it will have ISR listed in model name), then yes the Demco rail kit part #DM8552025-71 would work. If not, then the only rail kits that will work are from Pullrite.

Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…

It looks as if you have the #8-285-10UC3-A Dexter Oil Bath hubs. Thanks for sending the photo! Those hubs take a 12 x 3-3/8 inch brake assembly, I'd recommend a self-adjusting brake assembly kit like #K23-532-533-00 which are compatible with a 4…

While we do have what will work for you, both the wheel and tire need to have the capacity to handle that much weight and if you have 15 inch wheels, there are no tires that will fit which have the needed capacity. We also do not carry any wheels…

We have a replacement plunger sockets that could potentially work for your horse trailer window. Check out the Nylon Replacement Socket part #DH600S. This part can also be used on windows and measures 7/8 of an inch tall. For a socket door holder and…

The closest grease seal we have to what you're looking for is the Grease Seal part #10-9 which measures 1.500" I.D. x 1.987" O.D. It's commonly used on 2,700 lb axles.

Hey Craig, thanks for your recent order with etrailer.com. We really appreciate your business. I have a couple different options that would work for you. Yates offers the thermoplastic rubber bow roller in yellow, #YR450Y, and blue, #YR450B. The…