!Expedition  x   >   Polar Hardware  x   >  

If I cut down the 6 hinge, how would I secure the pin? | When you cut down the Hinge # H150 you will need to peen over the end to ensure the hinge cannot slide out of the hinge. If you do not have enough pin let to peen on the end of the hinge...

I need a replacement hinge for a 2000 sooner horse trailer gooseneck. | We don't have any way of knowing what hinge is on any one trailer, so you'll need to determine both the type of hinge you need, how it installs, and the correct measurements. For...

I needed a dimension for the stainless steel economy side door lock and contacted your live chat. The reply I got was a redirect back to the same picture that is posted on your internet listing for this product. I need to know the width of...

I have two Qs, please. 1 Is this vent cover white or metal silver? The photo looks white, but the description says silver. Does it come in white? Thanks! | The color of the 2-Piece Side Vent for Enclosed Trailers # 9139 is a glossy white...

Do you have a dimensioned drawing of the above part? | I do have a dimensional drawing of the Easy Grip Assist Handle part # PLR6624-A and have attached that for you. If this drawing does not contain the measurement you need just let me know...

I need the bolts to go with the hinges also | Based on your picture it appears your trailer currently uses some screws like the 1" Long Black Torx Wall Liner Screw # WLS100. I do recommend verifying the correct bolts needed with the trailer...

I need the cover for this vent?? | There isn't a specific vent cover for Polar vent # PLR23 but you can use # CAM40431. This cover is 18-1/2" long x 18" wide x 8-1/2" high so it will cover the Polar vent. I have linked a video featuring this...

Hello, building a square back small trailer. Looking for door latches like BA93FR. Guessing that die cast zinc is stronger than glass filled? Is there a right/left side in this model? Are there other models that you recommend? My door will be...

Does one weld the cams into the ends of the 3/4 inch pipe? How does one deep the pipe from ping down the the door is opened? | Yes, the cams (as well as the handle) need to be welded to a 34" Schedule 40 Plumbers Pipe with a 1.06" outer diameter...

I have a Bar Lock to install on an enclosed trailer. do you stock a hardware kit. on other trailers I see it is attached using a carriage bolt and a flush barrel nut. I think these are considered Sex bolts. what do you recommend? | We dont'...

What side should be up when ramp is open on the trailer, ribe side or flat side | I'd put the rib side up on the 3" Wide Continuous Steel Hinge # H300 if for no other reason it would allow you easier access to cleaning and lubricating the...

Im interested in purchasing item # MA94ZR.My question is this item is 72 long. Do you offer this item in a 48 or a 96 length | The stainless steel options of the Marlboro hinges only come in 72" like the # MA94ZR. You could cut this down to...

Are they sold in pairs? | The Polar # PLR1005 Butt Hinges are sold individually in a quantity of 1. If you click the link, you can see a product description video that includes the dimensions of the hinge. |

I am looking for a small cam action lock, only 24inch vert, that is already welded up and ready to go. Do you sell? | The Polar Hardware Cam-Action Lockable Door Latch Kit w/ Narrow Hasp # 383200 is designed for smaller enclosed cargo trailers,...

Hi I am looking for a piano hinge for an outside kitchen door. It is for a 2011 Keystone Outback 312bh 10th anniversary edition. | We have the 6 foot long 1-1/2 inch flat width Wide Continuous Steel Hinge # H150 which is a piano hinge used for...

We are looking for a specific part and cannot find it anywhere. It is a latch for a cargo sport utility trailer. | We offer two Replacement Handle Latches for the Universal Cam-Door Lock. We have part # 158-101. This replacement handle latch...

What alloy of S.S. is this model hinge made of? | The stainless steel allow of the Hinge part # SH300 that you referenced is 304. |

Looking for 2 weldable, steel, hinges with removable pin so tailgate on utility trailer can be removed and reinstalled as needed. Do you have hinges as such? | The only ramp door type hinge we have that is weld on with a removable pin is the...

I have a 2014 Silverado. The hinges make it very easy to open and close. I have an application for which I would like a similar type of hinge. Do you have such a thing and what is the cost. The hinge system would need to be able to handle...

I have a 6x12 enclosed trailerwith ramp doors. Can i convert to a ramp door? | We don't have the ramp itself but we have some parts that may work for you. We have hinges, like # SH300, for the ramp. I've linked our complete selection for you. We...

Im looking for a latch for my enclosed car trailer. Is there an email address I can send you a picture? | For a similar style door latch to what is currently on your trailer, I recommend looking at the Polar Cam-Action Lockable Door Latch Kit...

I have a few questions about the part PLR158. The keeper and lug are the mechanisms that mesh on the bottom and top, correct? Also, how does the handle mount to a bar? | The keeper and lug of the part # PLR158 are the two pieces that mesh together...

Im looking for a 6 stainless piano hinge for my fold out extension on my enclosed trailer door. I think I need a 2 Hinge, but I dont see any of yours that have pre drilled holes. The fold out will be wood, maybe 12-18 deep and 6 1/2 wide....

Will this hold double doors together ? | Yes, the Lock Side-Door Bar Lock Assembly part # 305736 can be used to hold a set of double doors together. That said, you may also want to add some keepers on the top or bottom like part # F719-182Z104...