Trunk Mounted Bike Rack Recommendation for a 2003 Ford Windstar
Will this brand work on the back hatch of a Ford Windstar Minivan? Im trying to find an economical way of transporting our bikes but fear that this style isnt the right one for my van? | There is a good chance that the SportRack Trunk Mounted...
Comparing Pro Series Caster Wheel PS1400750340 and JC-102
Can you tell me the difference between this caster wheel and this one PS1400750340 Thanks. | All of the relevant dimensions and capacities are the same between the Pro Series Wheel Caster # PS1400750340 and the # JC-102 that you referenced....
Trailer Wiring Harness Options for a 2003 Ford Windstar
Will the Hopkins 48895 converter kit work on this vehicle? | Hopkins tail light converter # HM48895 is a universal fit item so you can use it on your 2003 Ford Windstar. There are other, custom fit options available though. Check the build-date...
Weight Distribution System for a 2000 Ford Windstar Towing a3,036 Pound Camper Trailer
Hello, I have a Rockwood 2302 that has a HW of 316 lbs, DW of 2297 lbs, and GW of 3036 lbs. I am looking into purchasing a WDH for this popup that will be towed by our 2000 Ford Windstar. Can you make a recommendation for my specific application?...
Replacement Hardware for a Hitch on a 1998 Ford Windstar
Do you sell the bolts and washers and nuts for a hitch? I have a 98 windstar and I have the hitch that was taken off it, I want to put it back on but need bolts, leaders and a wiring quick kit. Thanks for any help you can give. | We can obtain...
Roof Rack Recommendation for a 2002 Ford Windstar Without Factory Tracks
I would like to install tracks in the grooves on the roof of my Ford Windstar. Can you help with advice and parts. | To install tracks in the grooves on the roof of your 2002 Windstar you will have to have a custom installation done. I checked...
Replacement Control Module For a Kwikee 909506000 Control Module
The part number on my kwikee module is 909506000. I hot wired the steps and the motor worked. The steps were going part out and in continously. Sounds like the module to me. Your thoughts please and do you have this part. 2004 Fleetwood...
Parts Included with Air Lift # AL25804 Air Shock Controller Compressor
Does this include an air tank, air compressor andand, pressure switch? | The Air Lift Air Shock Controller Compressor, part # AL25804 includes the onboard compressor; dash mounted gauge panel; hardware and air lines. An air tank isn't included....
Towing Capacity of a 2000 Ford Windstar and Trailer Hitch and Wiring Recommendations
Towing Capability | Your 2000 Ford Windstar has a gross trailer weight rating of 2,000 pounds unless it has the optional trailer tow package AND 3.8 liter motor. If it has both of those features then it is rated for up to 3,500 pounds. Curt...
Can Main Body Assembly be Reversed of Curt Universal Trailer Hitch on 2003 Ford Windstar
13900 hitch on my 2003 ford windstar - this hitch mounted ok but seems a bit low. can I turn center bar where receiver hole is up side down to get more height | I took a look at the directions of the universal-fit Curt Trailer Hitch Receiver...
Recommended Trailer Wiring Harness for a 2002 Ford Windstar
Im looking for what happened to the video on installing wiring harness 118366 on a 2002 Ford Windstar. I had bookmarked it so I could reference it when I was ready to install it, and now that Im ready it is gone. | Hey Phil, I think I found...
Thule Passage 3 Bike Trunk Mount Bike Rack Recommendation for a 2000 Ford Windstar
for a 2000 ford windstar van what is the best strap mounted rear bike rack that would fit safely? | For your 2000 Ford Windstar I would recommend that you get a Thule Passage 3 Bike Trunk Mounted Rack, part # TH911XT. If you have a bike with...
Replacement for Kwikee Control Module 909513
I have a 1991 30 ft. fleetwood southwind and need a replacement control mogul for the step . The old # is 909513 Thanks | The correct replacement control module for your Kwikee Steps with Control Module 909513 is the Lippert Components...
Hooking Up Adapter 4 Pole to 5 Pole # 20036 To 2002 Ford Windstar
I have a problem because the possitive wire is not the wire being switched by the backup circuit switch. It is the negative ground wire instead. I think I might need a relay to make this work. What do you think? | The item you selected, Adapter...
Is There a Replacement Ball and Flush Kit for Dometic Model 311 Toliet
I am needing a ball and rod kit for the flusher on a model 311 rv toilet. | I do have an option for you but these parts are not offered as a replacement for this mode unfortunately. Therefore, your best option is a full replacement, the Dometic...
Which Wiring Harness Do I Need For My 2003 Ford Windstar?
ford windstar manufactured o5/2003 will light kit hm40615 fit | Your 2003 Ford Windstar will require the Plug-N-Tow (R) Low-Side Switching Hardwire Kit # 36345 since it was produced after October 2002. Ford switched to a negative power input...
Replacement Atwood Water Heater for Model GC10A-4E
Have 2006 Fleetwood Southwind with a GC10A-4E 94021 water heater. Is FR98SR that correct replacement? Thanks | The best water heater replacement for your Atwood GC10A-4E is the Furrion RV Tankless Water Heater # FR98SR because the tankless...
Draw Bar Recommendation for a 2002 Ford Windstar LX
Hello I have a question as I have 2002 ford windstar LX it can ball mount in sloppy or just as it is in the picture, as I gave the ball mount upper or lower Than Nothing gonna be happen? thank you and have a nice day | This Cushioned Ball Mount...
Could Replacement Gear Motor part # LC386480 Fit 2002 Fleetwood Southwind
Can you confirm this is the correct model. 2002 fleetwood southwind 35R. Workhorse w22 chassis. Street side slide motor lc386480 | If the motor you found on your 2002 Fleetwood Southwind 35r has the number 386480 like I believe is what you said...
Hitch Recommendation for a 1999 Ford Windstar Towing a Aluminum Boat and Trailer
Will this hitch an van be able to pull a 16 foot lund aluminum boat? Also i have rear heat an ac, the hoses look like they would be in the way. ty for your time | The Curt Trailer Hitch Receiver part # 13085 that you referenced has been confirmed...
Hitch that Fits 1998 Ford Windstar
Do you have a hit for my 1998 ford windstar with a 2 inch ball hitch assembly? | We have the Curt part # 13085 that fits your 1998 Ford Windstar. It is a Class III hitch that uses a 2" ball. It has a 400-pound tongue weight and 4000-pound...
Can the Swagman XTC-2 2-Bike Platform Rack be Used on a Fleetwood Southwind Class A Motorhome
Is this bike rack appropriate for use with a Fleetwood Southwind 32 ft. class A motorhome? | Yes, the Swagman XTC-2 2-Bike Platform Rack part # S64670 is rated for use on a motorhome so it can be used on your Fleetwood Southwind Class A Motorhome....
Are Two Power Wires to Battery Needed to Hookup a 4-Pin and 7-Pin Connector on 2003 Ford Windstar
Plan on installing 4 pin wiring connector #36345 and 7 pin wiring connector #30717 to provide 12v power to my pop up camper. Do I need to run two lines to my battery, one for both units? Thanks, | Yes, you will need to run separate wiring for...
Does Solera Manual Pull Style to Power Awning Conversion Use Old Awning Arms
I have a 2000 Fleetwood Southwind with manual pull out awning and seen the Solera power Conversion kit my question is do I use my old arms that have slide out and lock arms or is new ones part of the kit? | You will continue to use your awning's...
Filter Your Search
Contact and Help