How Much Tire Clearance is Needed for Timbren Rear Suspension Enhancement
I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...
Installation Tips For The Bestop Traditional Bikini Top On A 1970 Ford Bronco
Cant get the Bestop more than half way into the channel. Im struggling with the top should i use a hair dryer to warm up the channel and maybe Vaseline. Thanks | Using a hair dryer on the channel # B51206 can sometimes help make a smoother...
Do Any of the Jerry Can Holders Fit a 1970 Toyota FJ40 Land Cruiser?
do any of the jerry can holders fit a toyota fj40 spare tire mount? looks like they are only for jeeps. thanks. | I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR...
Recommendation for Timbren Rear Suspension Enhancement for a 1970 GMC C-10 Pickup Truck
Timbren REAR kit for 1970 GMC 1/2 ton w/ leaf springs | The correct Timbren rear suspension for your 1970 GMC C-10 is Timbren Rear Suspension Enhancement System, # TGMRC10A, that you have referenced. I have included a link to the installation...
Trailer Hitch and Wiring for 1970 Ford F-250
Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...
Tonneau Cover to Fit 1970 Chevrolet El Camino
do you have correct fitting tonneau for my 70 chev el camino | As a matter of fact we do. The Craftec Hatch-Style Tonneau Cover # 252198 is confirmed to fit your 1970 Chevrolet El Camino. This tonneau cover has a light aluminum frame and gas...
Trailer Hitch Recommendation for a 1970 Chevy C10 with Step Bumper
Hello, im looking for a hitch for my 1970 chevy c10 pickup, with a 8ft bed, and a factory step bumper. Spare tire is mounted under rear of the bed. 500lb tongue and 5000lb trailer being pulled with a weight distribution hitch. | The Class...
Trailer Hitch That Exits Through License Plate Area with a Roll Pan
Which trailer hitch for C10 1970 allows for a behind the license plate mounting. no . also, i want to combine this with a roll pan rear with tilt away license plate no bumper Truck is a longbed with coil rear springs. | I do have a trailer...
Comparing Proportional and Time-Delayed Trailer Brake Controllers
I also tow small trailers, as well as a 12,400lb camper. Should I get a time delay controller? | In regards to choosing an electric trailer brake controller, you have proportional and time-delayed options. The best option would be a proportional...
Do Hellwig EZ 990 Helper Springs Affect Unloaded Ride Height
Will this change the height of vehicle? thanks | No, the Hellwig Helper springs like the part # HE62FR that you referenced do not affect the unloaded ride height. |
What is Hook Throat Diameter of Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10
What is the diameter of the holes the cord fits through on this product. Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 | The dimension you are looking for on the Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 is 3/4...
Can the Side or Traffic Cameras on the Furrion Vision S Wireless Camera System Be Adjusted
The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...
Recommended Axle for M416 Trailer and Wiring Harness for 1970 Toyota FJ40 Landcruiser
I have an m416 trailer and would like to get your recommendation on an axle with the ability to install and use the stock cable brakes. Also, I will pull with a 1970 Toyota FJ40 Landcruiser. What wiring harness do you recommend for the vehicle?...
Installing a Trailer Brake Controller From Scratch on a 1970 GMC C30 Pickup
Im putting a CM brand flatbed on my 1970 GMC C30 pickup. The flatbed is wired for a 7 way connector, and I would like to add a trailer brake controller so I can use the pickup to pull my car trailer with electric brakes. What do I need for wiring...
Recommended Chrome Rear Bumper for a 1970 Chevy C10
1970 c 10 chevy step side rear crome bumper and brackets | The Westin Fey Diamondstep Rear Bumper part # 21000 is recommended for a 1970 Chevrolet C10. It does not however come with brackets as there are not any for this application but you...
Recommended Electric Cooling Fan for 1970 Ford Mustang with Cleveland 351 Engine
I have a 1970 mustang with a 351 Cleveland engine! Have had a heating problem forever!Runs about 215-220 temp when sitting still in the summer! What do u have to help me with that? | The Flex-a-lite 15" Black Magic # FLX160 is the best available...
Are Small Plates of the Westin Fey Diamondstep Bumper Needed to Install on 1970 Ford F-100
What does the small plate that came in the assembly box go? We are having trouble understanding the instructions that came in the box. Thank you | I spoke to my contact at Westin and he informed me that the smaller plates you are referring...
15 Wheels Availability With a 5 on 5-1/2 Bolt Pattern And Largest Compatible Tire
I am looking for a 15X6 rim with a 5.5X5 bolt pattern for an old stock trailer. I can seem to find one on your site. Can you help me out? Thanks | The Vesper Steel Modular Trailer Wheel # TA37RR is the only 15" wheel we carry that have...
Class V Trailer Hitch Availability For A 1970 Ford F-250
Looking for a 15800 Curt tow package for my 1970 f 250 pichup | I do have some solutions for your 1970 Ford F-250, however, the Curt Trailer Hitch Receiver # C15800 you reference is not a fit for your truck. If your vehicle has the deepdrop...
Progressive Dynamics RV Converter and Smart Battery Charger for Flooded Lead Acid Batteries
Progressive dynamics charger converter. Looking at the 45 watt and it says lithium. Will it work with flooded lead acid? | For flooded lead acid batteries we do have the converter you need, which is the Progressive Dynamics 9300 Series RV Converter...
How Large Of a Mounting Hole Is Needed For the Backup Light w/ Chrome Housing # BU11CS?
What is the diameter of the light socket mounting stud? It appears that a drilling is required for the mounting surface. Is a bulb light included? Can an amber colored be used and what is the bulb specification? Thanks. | To install the Backup...
Installing Timbren Springs On A 1970 Chevy C10 With A Slot In The Bracket
I have a 1970 Chevy C10 that could use the Timbren rear suspension enhancement but the drawings and photos on your website show the axle bumper mount having a hole in the center. Mine, however have a slot. Does Timbren have a different kit...
RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide
I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...
Replacement Axle Solution for Camper with Bearing Numbers M12649 and LM48548
I have a makeshift trailer that I believe was made from a 1970 Impala. The bearings are M12649 and LM48548. Do you have replacement hubs that will fit a spindle that uses those bearings? | Unfortunately, we don't carry any replacement hubs that...
Filter Your Search
Contact and Help