The Dexstar #AM20789 Mini-Mod wheel and the Americana #AM20906 valve stem are indeed compatible with each other, but the center cap you referenced, part #LHCS102-SI60C is compatible with a 3.19 inch wheel pilot hole diameter, and wouldn't work…
The thickness of the tube is not any different as they are both 3 inch diameter, and the spindles are also the same utilizing the same inner diameter bearings, hubs, and seals. The difference in capacity is in the custom bend in the axle that creates…
The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…
The Superwinch Winch 2 Go Portable Winch - Wire Rope - Hawse Fairlead - 4,000 lbs, part #SW1140222, has the following duty cycle 15 seconds on 5 minutes off. I have included a video demo link below.
Generally speaking, trailer jacks are intended primarily to handle vertical loads. However, the Bulldog Square A-Frame Jack #BD195318 that you referenced will typically provide better horizontal (side load) stability than a round tube jack of…
The Superwinch S5500 Trailer Winch #SW1455200 mounting bolt holes are separated apart by 3-3/4" on center (see attached photo). Attached is a review video for you to reference as well.
EcoHitch does not allow their instruction manuals to be linked, so I cut out and added the most relevant portions of the installation of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7352. This hitch, which is a confirmed fit for your…
The B&W Tow & Stow Adjustable 3-Ball Mount #BWTS20049B has a 2-inch ball rated for 7500-lbs. You are right that standard individual 2-inch hitch balls can carry much higher ratings, such as Curt 2-inch ball #A-90 which is rated for 10K. All…
I would be happy to help you find the right ball mount for your husbands birthday. You are gong to need to measure the receiver on the end of his F-350 to determine the correct ball mount you need. You will want to measure the inside of the square.…
Hey Tony, thanks for reaching out. The Kodiak 13" Hub and Rotor #KHR13858D doies have 5/8" studs but there are a few other things you will want to consider to be sure it will work. Firstly, disc brake parts are brand specific. So the Kodiak…
Hello James, thanks for reaching out. Yes, there is an option for the 18K BTU Chill Cube unit that comes with a thermostat that controls both the furnace and the AC. What you will need is the following: - Furrion Chill Cube RV AC w Air Distribution…
Filters
