To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
No more cramming gear or dealing with leaks. This deep box gives you more space to stash your tools, plus the big button provides quick access, even with gloves on. Lock it up when you're done, and count on your cargo staying dry and ready to go.
You won't waste time cramming gear into this box. The deeper design is a game-changer the first time you load up for the job, or toss in everything you need for a weekend out of town. It'll fit oversized drills, jack stands, and that box of tie-downs you usually leave behind. You won't have to pick and choose nearly as much with this box.
When your hands are cold, or you're wearing gloves, you need a box that just opens. The big push button is solid and responsive and locks or unlocks from either side. No more wasted minutes fighting with a sticky latch or a frozen lock.
Some boxes look tough until they're actually used. Here, you get thick aluminum walls, a lid that closes solid, and reinforcements that shrug off bumps and shifting cargo. You can drop heavy tools in, haul supplies, or even use the lid as a seat after work and not worry about the box flexing or giving out. It's assembled in the USA, and it holds up because it was built to.
You may have opened a box to find rainwater pooling under your wrenches, or a layer of dust on everything after a long drive. This one's built to keep the elements out. The tight seals stop water and grit at the edge. When you work in rough weather, you'll notice the difference from day one.
There's a tray up top that glides out when you want it, and screwdriver holders so your go-to tools are right there, not lost at the bottom. And the BedRug liner does more than look good, it cushions your tools and keeps things from rattling every time you hit a pothole. Your gear stays in place, and you don't have to dig for what you need. Plus, the reinforced front tie-downs give you a solid place to secure straps when you need to tie down extra cargo.
This box is custom fit for your truck bed, even with unique wheel wells or non-standard shapes. The angled design lines up where it should and installs using the included hardware and pre-drilled mounting holes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer. Let's take a look at the UWS truck bed toolbox with push button on both sides for opening. Now, this is a crossover style toolbox. It is an angled kind of design, 72 inches wide across the front, and it's a bright aluminum construction. So get right into it, folks.
The first thing I wanna look at is you have tie downs on both ends, an extra little add-on that they have, which I personally like. And then you have these push button buttons here on the side, and I will try my best to show you a better view without knocking this over here. So you can see it here, I can push it, obviously it's gonna open the lid and close the lid. They're gonna give you keys included. They do feature nice plastic ends.
And what's nice is with this key, once you lock this, you push in and turn it, and once you actually get it locked here, now all that button is recessed inside, it's flush, you can't access it, you can't get it open until you take that key and unlock it, and then and only then will that pop back out and then allow you to open the toolbox. So again, I like that feature, it makes it nice and secure, and that's on both sides of the toolbox. I do want to come from the top down here and let's take a look inside. And as you can see, you do get a nice plastic tray included. And if you take that up at an angle, you can get that out.
It's only a couple inches deep, and like I said, it pops back in at an angle. And then stepping around here, you got holes on this built-in side compartment here. So you can put screwdrivers and whatnot. Same thing on the driver's side. And then you have a compartment here, and this has carpet, and the bottom piece has carpet in it as well.
And it's pretty deep. I can reach down the side and I can fit this whole impact kit. The whole toolbox from the outside is 21 inches deep or tall from bottom to top. You have gas struts on both sides and on the bar across the front here where the latches work, they've covered that, so that protects that crossbar, which if you have an older toolbox like I do in my truck, that's a thing of kind of an issue or can be an issue because that bar, if you get this full to the top, like mine is, mine's overflowing, I get some straps and stuff from the webbing stuck on that and sometimes it doesn't wanna open and close. So this is a nice feature I wish mine had. And then of course they've got a foam gasket around it, keeping everything dust-free, you know, those kind of things. And UWS, they're the only toolbox that if you see these little black hole coverings, they actually inject an expandable foam inside of their lid, and they have the patent on that, and that keeps that really impact resistant. So whenever you see toolboxes that have been on the highway and stuff, a lot of times you'll see dents in 'em and that kind of stuff, not gonna see that with UWS, because they have a very, very sturdy lid, and they've got that reinforcement in there, which does make a big difference honestly. Now zooming back out, I do want to go ahead and go over dimensions. As I mentioned before, 72 across the top. That's technically from the edge of that piece. If you count the stick out buttons, it's 73 3/4 inches long. But the most important part you need to worry about is the height and the depth. So again, 21 inches tall and 20 1/2 inches deep. So it should fit most full size pickup bed lengths. Obviously, you can put it in a short bed. Just know, you know, it's gonna take up a lot more space, that's gonna leave you with less space as far as that goes. You do get pre-drilled holes in the side of it and everything and all the hardware to mount it. And you get some foam pads that go underneath the side rails, so when you put this on the side rails of your truck rather, it's not gonna scratch that up. It's gonna have cushion, it's gonna have a nice seal there as well. So everything's gonna stay dry inside. Again, simple push button to open and close, keys included. This is the UWS truck bed toolbox. I'm Steven, reach out if you have any questions about this or any other products, and have a great day.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.