Does Curt Trailer Hitch for 2010 Nissan Cube Require Stabilizing Strap for Bike Rack
Hello, Im looking at the Curt hitch for my 2010 Nissan cube. The Curt info says it requires a stabilizing strap for bike racks. Is that correct? My Cube has a rear spoiler that prevents an attachment point for a stabilizing strap, so the...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Tools Required to Install EcoHitch Hidden Trailer Hitch Receiver on a 2018 BMW i3
Im a terrible wrench - what tools and how much expertise is needed to install this? | The EcoHitch Hidden Trailer Hitch Receiver # 306-X7277 does rate a 10 out of 10 on our difficulty rating as it is a very in depth installation. It requires...
Best Bike Rack that Allows For Easy Loading Of the Bikes and Into The Hitch
I am 81 years old. I have a Sun bike which I love to ride but I’m tired of riding just the streets in my small town and want to drive to other locations to ride plus some bike trails. I am not very strong so need a rack I can put on the car...
Will The Curt Powered Tail Light Converter C59496 Work On A 2017 BMW i3?
I have a 2017 BMW i3 I would like to install this on. For some reason, this only lists 2019, 2020, and 2021 BMW i3 as compatible. I dont believe there is a difference. Can you tell me why this wouldnt work? | Hello Claus, thanks for reaching...
What is the Maximum Tongue Weight of the EcoHitch 306-X7277 for a 2019 BMW i3?
Max tonque weight of hitch ? | Hey Chuck. The EcoHitch Hidden Trailer Hitch item # 306-X7277 has a maximum tongue weight of 200 lbs. This hitch is custom fit for a 2019 BMW i3 and is the only option we have available for that vehicle. This hitch...
Will Saris Solo Bike Carrier Fit 2012 Nissan Cube Carrying 2015 Surly Pugsley
I have 2015 Surly Pugsley that weighs 33lbs13oz going on a 2012 Nissan Cube.Will the Saris Solo work for me? | Hi David; the Saris Solo Bike Carrier # SA102 is a confirmed fit for your 2012 Nissan Cube. Since your 2015 Surly Pugsley weighs less...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Installation of Yakima HangOut 2 for 2012 Nissan Cube
On a Yakima Hangout 2 how far apart should the arms that touch the care be on a 2012 Nissan Cube and where do you measure from | Hi David; Yakima lists the HangOut 2 # Y02637 measurement as 16-7/8" for the 2012 Nissan Cube. You measure from...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Weight of the EcoHitch Trailer Hitch for a 2016 BMW i3
hi, Id like to know about the shipment weigh of the product since Im arranging my friends canadian address to receive the parcel. Thanks | The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" item # 306-X7277 for a 2016 BMW i3 weighs...
Can a 5th Wheel Trailer with Sidewinder by Towed with No Wedge or Lock Out Bolts Installed
I have been working with Reese on questions about the Airborne Sidewinder pin box. Hopefully your tech department can help. we had this pinbox installed at the Northwood factory Arctic Fox and it was pulled 1300 miles to us. Its the first one...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Curt Hitch C11202 for a 2010 Nissan Cube to Carry a Bike Rack
I need a hitch. I’m planning to carry A electric recumbent trike.. I converted my old steel carrier Into a trike capable carrier. 1. Which option is easier to install 2. The carrier plus the trike will weight between 60-100lbs 3. Will...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Trailer Hitch Installation on a 2009 Nissan Cube with Ground Effects
My model has the ground effects kit like the chrome model. Will this fit? Also, bought a 3 bike rack to slide into receiver. Do I need the pin to take it in and out when not in use? It will do 2inch and 1 1/4. | We do have trailer hitch options...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Recommended Bike Rack for an EcoHitch on a 2017 BMW i3
Hi thinking of this purchase what bike rack system would you advise - please | With the EcoHitch # 306-X7277 having a 2 inch receiver opening and 200 pound capacity, you have quite a few options available. Though it will depend on how many bikes...
Trailer Hitch Receiver and Vehicle Wiring Harness For a 2016 BMW i3 With Range Extender
Hello, X7277 its OK for BMW I3 RANGE EXTENDER 2016 ? Thanks | Yes, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7277 will fit on your 2016 BMW i3 Range Extender. You may consider also installing the ZCI Circuit Protected Vehicle Wiring...
Filter Your Search
Contact and Help