bing tracking image

R1T  x   >   RZ  x   >   Rio  x   >   HHR  x   >  

Result:

Parts Needed to Flat Tow 2019 Jeep Cherokee Limited, Latitude or Latitude Plus

What all will I need to flat tow my 2019 Jeep Cherokee? I'm not sure which model I have. | For your 2019 Jeep Cherokee you'll need to first start with a base plate kit. For that you'd want the part # RM-521452-4. This fits the Latitude, Latitude...

How To Flat-Tow a Chevrolet HHR SS

Can I flat tow a chevy hhr ss? | Yes, the Chevrolet HHR SS is flat-towable with all four wheels down. In order to do so you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and...

Recommended Wiring for RedArc BCDC Charger Used for Auxiliary Battery to Power Inverter

I have the DUAL INPUT 40A IN-VEHICLE DC BATTERY CHARGER by RedArc. What else do I need to set up a dual battery syatem with solar to charge a fridge in the trunk of my SUV, a few led lights, some charging ports for phones and accessories? What...

Parts to Safely Flat Tow a 2006 Chevy HHR Without Breaking the Bank

Trying to setup a 2006 HHR as a toad, would like a base plate that doesnt require cutting or drilling if possible and the towbar to go with it, have researched several on your site but nothing really explains which ones go together. Dont want...

Are Parts of Hitch Replacement Hardware Kit RHK Available Separately

Hello Im looking for four 4 hitch mount plates. RHK parts. These appear to be available for a C11447 hitch. Dimensions are: 1inch X 3inch X 1/4inch with a 9/16 square hole, centered in the plate. I need these plates for a project Im working...

Location of Fill Ports on Valterra RV Water Tank

How can you fill this? I don’t see a fill port. Or does it require a pressurized water supply? | Hi Elliott; the Valterra RV Water Tank # R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture,...

Installation Steps For Installing That Kat's Block Heater # KH11812 In A 2012 Kia Rio 1.6L Engine

Looking for block heater 2012 Kia Rio 1.6. Engine ,manual , 5 door . Send proper part and install instructions… want to know what I’m doing befor I start | The correct block heater for your 2012 Kia Rio 1.6L engine is the Kat's Heaters Custom...

Will Adarac Aluminum Series Custom Truck Bed Ladder Rack Match 2022 Rivian R1T Roof Rack Height

I have a 2022 Rivian R1T. Does your rack height by chance match the factory rack height on the cab in case I wanted to use both? Thanks! | Hi Allen; I'm not sure what the factory roof rack height is on your 2022 Rivian R1T, but I can tell you...

Tonneau Compatible Ladder Rack For 2025 Rivian R1T With OEM Tonneau Cover

2025 R1T I am 5 4. looking for a ladder rack options the work with the Rivian Tonneau cover that rolls with the bed rail button. and the tail gate button and also the side cargo buttons. please help with information and options. | Hey Dave,...

Rhino-Rack Roof Rack for Truck Cap Track System

Good evening- I am hoping you can narrow down my product search with you to source a truck topper rack for my pickup. I have a ram 1500 with a topper in which I bought used with a existing track system. Could you point me in the direction of...

Ladder Rack that Fits 2025 Rivian R1t

Does it fit on a 2025 Rivian R1T, and how is it installed with a tonneau cover? Any drilling involved? | Hey Tammy, we don't have any tonneau covers for your 2025 Rivian R1T that have the needed channels to use the Truxedo Elevate Ladder Rack...

Will etrailer Anti-Rattle Device part # e38FV Fit Rivian Hitch

Do we know if this product will work on the Rivian hitch given its hidden, and fairly deep sunken? | Hey JZ, I would have to see the hitch but basically it would need to have a lip/collar around the outside of the hitch for the etrailer anti-rattle...

Recommended Baseplate For Flat Towing A 2008 Chevy HHR SS Turbo Model

Recommended base plate for a2008 Chevrolet HHR SS, turbo modelo | Hi Barry! We have two baseplate options available for your 2008 Chevy HHR SS: Roadmaster EZ Base Plate Kit - Removable Arms # 523159-1 Blue Ox Base Plate Kit - Removable Arms...

Replacement Fender for Shorelander SLR80TAL

Looking for replacement fender options for shorelander slr80tal dual axle boat trailer. Vin 1mdavp0234a266485. Only need one fender preferably aluminum smooth finish | Hey Alan, we do have one smooth aluminum tandem axle fender setup with the...

Will Swagman Swivel and Kuat Pivot 2 Swing Away Hitch Extender Fit Below 2025 Wrangler Sport Spare

I was going to get either the swag an swivel hitch or kuat pivot v2 and place it on a jeep wrangler sport 2025. I measured fro. The hitch center line to the bottom of my spare tire and its a little over 5 inches. Will I have enough clearance...

Good morning

Good morning. | Good evening, do you have a question I can help with Mohommad? |

Parts Needed to Add Trailer Brakes to a Dexter 3500 lb Trailer Axle

Looking to add electric brakes to my 6x13 enclosed trailer with a dexter 3500lb 10 torsion axle. It does have backing plate mounting brackets. It has 14 aluminum wheels. I belive its a ez lube. | Hey James, we have just what you need to add...

What Comes with Blue Ox Base Plate Hardware Kit # 63-3127

hello i would like to have the confirmation that see with the kit of bolt also if it is possible in how many times could I receive it thank you | I attached a picture that shows all of the hardware that comes with the # 63-3127 that you referenced....

Trailer Hitch that Fits 2026 Lexus RZ350e Electric

I’m looking for a 2 inch receiver that will fit my Lexus RZ350e 2026. I will be using it for a bike rack not for towing. I found the one that fits the 2026 Lexus RZ350 but it does not specify if it also works with the electric model. Can you...

etrailer Return Policy

What is your return policy? My fiancée is driving through Colorado where she legally has to have them, but may end up not using them at all. Would it possible to return them if they arent used? Thanks! | Hey Conner, thanks for reaching out! I'm...

Everchill RV Refrigerator w/ Freezer part # 324-000119 Compared to the Everchill WD-282FWDC

What is the difference between the 10cf model on your website and the 10.7 cf model WD-282FWDC I see on other sites online? | The Everchill RV Refrigerator w/ Freezer part # 324-000119 is the replacement for the WD-282FWDC you see listed on...

How to Add Addtional Cameras to the Furrion Vision S+

I bought a Furrion Vision s+ 7 in. System. I want to add additional cameras, sides and rear. Is this system capable? Thanks | It sure is John. The new Furrion Vision S+ Wireless RV Observation System like item # FR74AD works with up to four...

Is There a Way to Adapt Yakima Raptor Bike Rack to Crossbars with Channels

Hello, I have a pair of the Yakima Raptor bike carriers and Id like to mount these on the factory cross bars on my Rivian R1T. The bar size and shape dont seem to be compatible with the universal mighty mount. So Im thinking I can use the tslot...

Pintle Hooks that Can be Used with Stowmaster Tow Bar with Lunette Ring

Will this pintle hitch work with your Stowmaster towbar with a 3 inch lunette ring? | Hey Craig, so the Curt pintle part # C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part # RM-581 and not...

Filter Your Search