RZ x > RVR x > Rabbit x > 1 Series x >

Result:

Trailer Hitch that Fits 2026 Lexus RZ350e Electric

I’m looking for a 2 inch receiver that will fit my Lexus RZ350e 2026. I will be using it for a bike rack not for towing. I found the one that fits the 2026 Lexus RZ350 but it does not specify if it also works with the electric model. Can you...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Does the Curt C58VV Hitch Fit a 2026 Lexus RZ450e AWD and Affect the Hands Free Liftgate?

2026 Lexus RZ450e AWD with 2nd motor driving rear wheels. Does this Curt receiver fit? And does it interfere with the kick sensor to open the rear hatch? | Hi Stephen, Yes, the Curt Rack Receiver, Part # C58VV, is confirmed by Curt to fit...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Bike Rack or Bike Rack Adapter Compatible with OEM Roof Rack on 2011 BMW 128i

Hi..I have the OEM BMW roof Rack for my BMW 128i. I also have a Rhino DISCOVERY Roof-mount bike rack. I want to find out whether I can buy a kit to make the Rhino bike carrier work on my BMW roof rack. | There is a bike rack compatible with...

Muffler of 2010 BMW 1 Series Rattles Against Recently Installed Hitch

I followed the instructions step by step. This isnt my first hitch installation. When I drove it for the first time after the install I noticed that the exhaust sounded louder. After further inspection it seems that once the car warms up...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i

Just purchased and installed a hitch on my SRX from you folks......everything came together as the info supplied, including the video, said. Now Im on to a trailer hitch for a 2013 BMW 128i. Ive been swamped reading reviews and instructions...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Does Curt Trailer Hitch Receiver Fit 2010 BMW 128i Convertible

Does the C11184 hitch/receiver fit the 2010 BMW 128i CONVERTIBLE, and if so, are there any different install instructions? | It does! I verified for you with the manufacturer that the Curt hitch does indeed fit your 2010 BMW 128i convertible...

Curt Trailer Hitch for a 2012 BMW M135i Convertible

Any concerns with this trailer on a 2012 135 convertible that has the m package? | We have had a customer install Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item # C11184 on a M model BMW 1 Series before so we can confirm that...

Can I Haul A Trailer With 2 Motorcycles With My 2012 BMW Series I With Class I Hitch?

Hi, I would like to know if the class 1 tow hitch is enough to pull a 300 lbs trailer with 2 motorcycles both weighing 409 lbs. | On your 2012 BMW Series 1 your only option is the Curt Class I 1-1/4 inch hitch # C11184 which has a max tongue...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

E-Bike Rack Recommendation for Fitting Bike with Wider Frame Tube

would like to use this rack for 2 Ebikes. the battery is in the down tube so that tube is larger than usual, even with battery removed. HOW BIG...what diameter will the saris cradle and strap enclose? is there a LONGER Strap for the cradle...

Recommended Roof Racks for Mitsubishi RVR 2018

Hi! Not sure if Mitsubishi RVR roof racks have changed over the years but interested to hear recommendations. | We have roof racks that are a confirmed fit for your 2018 Mitsubishi RVR. If you have a naked roof you'd want the Rhino Rack kit...

Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR

I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...

1 2 3 4

Filter Your Search