Result:

Since the Atwood 36681 is discontinued what would be the best replacement considering the size of the 36681 hole Im dealing with? | You could use the 2-wire Propane Gas and Carbon Monoxide Detector part # RS34FR in place of the Atwood 36681...

I need a propane detector for my 2017 Winnebago micro mini camp trailer the original Atwood propane detector went bad so I need a new one the numbers are PP00384842 33535E just curious what the replacement would be for this being dometic bought...

Not sure which replacement model to get. I have no clue the other numbers I found on mine are pp00276003 33535e Can you please help me | You can use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black) to replace your current Atwood...

Our 2018 Hideout travel trailer has an Atwood 35230A Propane gas detector in it. I dont see that one available, what would be the replacement? | Hi John; the RV Safe Propane Gas Detector is designed to replace old discontinued Atwood models....

Looking for a LP Gas Leak Detector to replace CCI Pre Tell 21, Model No. 7770.2 Propane Gas Leak Detector. 6 3/8inch x 2 7/8. | Hey Paulette, thanks for the pictures and information! We have two options to replace your CCI Pre Tell 21, Model...

Do you have a straight stake pocket that fits a 2x4 without cutting the wood? I replace my stakes regularly and dont have the time to taper to fit. | I do have an option for you but the Rack'em Heavy Duty Stake Pocket for Flatbed Truck or Trailer...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

I am looking for a replacement for my airstream propane detector Atwood model LP_DOB part 31013 In my research, I believe to have the older model 2.5 inch wide by 3 7/8 high, with replacement being 36720. Do you have an alternative. Curious...

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

What rack available is best suited for this type trailer 2002 wells cargo trailer utility body 6x10 with fiberglass nose cone rack for hauling ladders and lumber | We have a couple options that will work for your Wells Cargo trailer. The...

looking to replace an OLD propane detector in a pop up, This is the part I have that is old and not working see pictures looking at your Atwood 36720 RV Propane Gas Detector - 12V DC, White. Will this work? Im not worried about mounting/size...

replacement for RV Propane Gas Detector Model LP_DOB Part31013 | Hey Kathy, to replace your current Atwood 31013 propane detector, you can use the RV Propane Gas Detector # RS64FR. This detector measures 4-1/4" long x 2-5/8" wide x 1/2" thick,...

My gas detector is beeping. I’d like to replace it. The ones you suggest are not the same shape. Please help. I have the Protechtor series 2001 | Hey Anita, thanks for the information! The older Protechtor series 2001 propane detectors...

I have a 2025 Ram 1500 Laramie and would like to add a tailgate light bar or strip. Another person I know has tried this on his and has gotten dash warning lights etc. His light works but it does things like shut off his rear park sensors thinking...

I am looking for a side bagger for a husqvarna Z4219 mower. Do you have one that would fit this model? Thanks | Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher # RCMMS4-EXS1. This comes with the 4.4...

I need a replacement Atwood propane gas dector model LP DOB Part 31013 or a compatible that fits the 3103 wall bracket. I can send you a picture. | Hey Alan, you can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013...

I have a picture of my trailer tire that I need a rim for where can insend this picture to to determine a correct sizing? Thank you | There are a few measurements needed to ensure you get the correct wheel replacement, but it is difficult to...

does this bumper have an option for D-rings? what is required to flat tow my 1999 jeep tj behind my motor home with air brakes? Thanks | The Rampage Rock Rage Front Bumper for Jeep # RA97801 doesn't have a D-ring add-on option so you'd have...

I need to replace my Atwood propane detector 31013. If I use the updated version, can I mount it sideways | Hey Robert! Yes, the RV Propane Gas Detector # RS64FR (white) and # RS44FR (black) can be mounted vertically to better fit that existing...

I need a grass catcher. I have a Torro atimecutter 42In. What model number will eork for me. And will I need to purchase anything elese to install. Thanks. Karl | Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the...

I would like to install these lights on the rear of my 5th wheel trailer. What issues will i have? Heading to Alaska and want as much lighting on rear as possible. | The Rampage SuperBrite LED Tailgate Light Bar # RA960134 will install using...

I need to replace a very old CCI Controls 7719 3-wire LP Alarm with solenoid valve control. My preference would be to simply bypass the valve control need to ensure the valve remains open and use any of the standard 2-wire detectors. Your...

Part number RS44FR. Will the one I order be good for 5 years or be the one on your web site that expires in Oct 2025? Thank you | Hello Bill, thanks for reaching out. The RV Propane Gas Detector # RS44FR has a 5 year lifespan. We have carried...

Looking for a rack I can mount a rooftop tent to on a trailer. Trailer is 48 x 96. Would like 40 inches or more clearance | There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an...