Result: knobs

| Using the anti-rattle knob is sort of a science. The best tip I can offer is to tighten the knob like you normally would. | I bought # 75270 hitch for the 2010 Honda Odyssey. I have Thule Apex 4 swing away...

The knob can be placed wherever you have space in your Sienna, and while there isn't a custom mounting panel for the knob in your Sienna, there is the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

The knob wont even do a full turn both ways as it locks tight but the anti-rattle doesnt move. | I have a Nissan Murano 2007 with a 2inch hole. I purchased a Thule Apex 5 bike and have been satisfied until I cannot tighten...

I have a 2006 Scion TC and I want to make sure the knob on rack will not be in the way of the Draw-Tite. # 24827 that I just purchased from you. | I have a 2006 Scion TC and I want to make sure the knob on rack will not be...

The reason is because on a steep decline you can use the control knob to set your trailer braking to a higher intensity, which keeps the trailer from pushing your Jeep. | I plan on getting hitch 76104, but I need some advice...

To reduce the brake output simply slide the output knob at the front of the unit (on the left side) slightly to the right. | We step on the brakes only the red. Comes on in the brakes completely lock up on the trailer | If...

Can you tell me if there will be sufficient clearance between the hitch tightening knob and the bumper. Thanks | I just purchased a Thule Helium Aero 2 bike rack and a Draw-Tite 2inch hitch receiver to give to my wife for Christmas,...

The main unit installs behind the dash so only the control knob is visible. The knob controls the brake power and also acts as the manual override. | Maam / Sir, I have a 1997 K3500 Crewcab Dually...

The knob controls the brake power and also acts as the manual override. | I would like to add a brake controller to my 2024 Grand Cherokee L. What all do I need to make this work? I don't have anything for towing right now....

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. | hello im trying to install trailer hitch and trailer brake controller on a 2010 ford...

WHEN CONNECTED TO VAN GREEN LIGHT IS ON WHEN EMEGENCY BRAKE IS APPLIED ,LIGHT TURNS RED WHEN FOOT BRAKE IS APPLIED LIGHT STAYS GREEN NO MATTER WHERE THE POWER KNOB OR LEVEL KNOB IS. WHAT IS THE PROBLEM? | WHEN...

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. | I am looking to have a 7 pin on my 2020 jeep wrangler, there is not hitch or wires...

The main unit installs behind the dash so only the control knob is visible. The knob controls the braking power and acts as the manual override. | Will this fit a 2024 Crosstrek Wilderness? | The Draw-Tite...

Finally, for a brake controller the best option for your 2018 Jeep Wrangler JL Unlimited is the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because of its control knob which keeps a cumbersome unit out of the cab of your Wrangler (the control knob of the Tow-Pro Elite can be installed anywhere you like, as you can see in the accompanying photos), and because it gives you more control over your trailer braking power than any other brake controller. |

The Speed-Knob also has an integrated hitch lock, improving the overall security of the rack. | In my previous car, a 2007 Honda CR-V, the bike rack hitch seemed a little large for all the bike racks I tried all 2 inch,...

While the back of the anti-rattle box sits 3 inches from the center of the hitch pin hole, and the anti-rattle knob sits 4-1/4 inches from the center of the hitch pin hole, the first component on the bike rack that could interfere with clearance is the knob on the backside of the rack at 7-1/2 inches from the center of the hitch pin hole. |

The knob controls the braking power and also acts as the manual override. | What all do I need to add a brake controller to my 2024 Atlas? I don't have a hitch or anything on it right now. Thanks. | For a complete towing setup...

It's a simple knob that goes from 0 to 10 and lights up when the brakes are being actuated on the trailer. | Can I put a class 3 hitch on the 2023 Kia Sportage Hybrid EX or zSX Prestige and if so what is the towing capacity....

The main unit for this brake controller installs out of sight, with only the control knob visible. The control knob lets you adjust the braking power and also acts as the manual override. | I have a customer...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

The trailer brakes are adjusted using the control knob which can be mounted within reach of the driver. | I need a complete towing package for my 2022 Toyota Highlander, hitch, wiring and brake controller. What parts are needed?...

The wedge tightens by spinning the orange SpeedKnob at the bottom of the rack. When tight in the tube, the SpeedKnob can be lock to secure the rack in the hitch. | Can we purchase a different base that would...

Set the power output to the maximum 13 volts using the power knob and activate the manual knob. Use a volt meter to test the output on the blue wire. | I have installed the Prodigy 90185 into my 2007 Honda...