Will Draw-Tite Max-Frame Trailer Hitch Fit 2024 Subaru Crosstrek Wilderness

Published 12/07/2023

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(408)

$181.15

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(2967)

$49.15

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1375)

$93.56

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(1455)

$174.17

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3398)

$121.18

Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional

(2506)

$190.00

Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers

(420)

$27.00

Question:

Will this fit a 2024 Crosstrek Wilderness?

asked by: Robert

Expert Reply:

The Draw-Tite # 76209 fits all models of the 2024 Subaru Crosstrek, including the Wilderness. If you have the hybrid then this hitch is the best and only choice. If you do not have a hybrid then I recommend the etrailer # e98912 instead. Unlike the Draw-Tite hitch, the etrailer hitch has a concealed cross tube so it has a cleaner look and gives you better clearance.

I see you also looked at trailer wiring. The T-One Vehicle Wiring Harness # 118467 fits non-hybrid models and is the most reliable option for a 4-way. This plugs into the connection point in your rear cargo area. It would also be required before upgrading to a 7-way with the # ETBC7.

If you're towing a trailer with brakes, I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. This is simple, reliable, and doesn't take up space in the cab of your vehicle. The main unit installs behind the dash so only the control knob is visible. The knob controls the braking power and acts as the manual override. You would also need the # RED69FR for installation.

In order to complete your setup you will also need a ball mount. Check out the etrailer Ball Mount Kit # 989900. This kit has two ball mounts, one with a 3/4" rise or 2" drop and the other with a 2-3/4" rise or 4" drop. It also comes with a 1-7/8" and 2" ball, as well as a ball mount bag to store everything in.

I have attached some review and installation videos below for your reference.