Result:

Since the Atwood 36681 is discontinued what would be the best replacement considering the size of the 36681 hole Im dealing with? | You could use the 2-wire Propane Gas and Carbon Monoxide Detector part # RS34FR in place of the Atwood 36681...

I need a propane detector for my 2017 Winnebago micro mini camp trailer the original Atwood propane detector went bad so I need a new one the numbers are PP00384842 33535E just curious what the replacement would be for this being dometic bought...

Not sure which replacement model to get. I have no clue the other numbers I found on mine are pp00276003 33535e Can you please help me | You can use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black) to replace your current Atwood...

What is the inside cubic feet or inches of this cargo holder? | The Replacement Pod for Rola Enclosed Cargo Carriers # 10188 for the Rola Swinging Enclosed Cargo Carrier, can hold a total of 13.5 cubic feet of gear. has an internal dimensions...

Do you have a straight stake pocket that fits a 2x4 without cutting the wood? I replace my stakes regularly and dont have the time to taper to fit. | I do have an option for you but the Rack'em Heavy Duty Stake Pocket for Flatbed Truck or Trailer...

Our 2018 Hideout travel trailer has an Atwood 35230A Propane gas detector in it. I dont see that one available, what would be the replacement? | Hi John; the RV Safe Propane Gas Detector is designed to replace old discontinued Atwood models....

It appears that this Pod DOES NOT include the swing away receiver mount. Do you offer it separately? part 10188? | Hey B, No, the Rola swing away cargo carrier has been discontinued for a bunch of years now, and there are none of the receiver...

Looking for a LP Gas Leak Detector to replace CCI Pre Tell 21, Model No. 7770.2 Propane Gas Leak Detector. 6 3/8inch x 2 7/8. | Hey Paulette, thanks for the pictures and information! We have two options to replace your CCI Pre Tell 21, Model...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

I am looking for a replacement for my airstream propane detector Atwood model LP_DOB part 31013 In my research, I believe to have the older model 2.5 inch wide by 3 7/8 high, with replacement being 36720. Do you have an alternative. Curious...

What rack available is best suited for this type trailer 2002 wells cargo trailer utility body 6x10 with fiberglass nose cone rack for hauling ladders and lumber | We have a couple options that will work for your Wells Cargo trailer. The...

My tekonsha p3 will not power on. On the harness that plugs into the back of it I have +12V on the red wire and Ground on the Black wire. Should the +12 and Ground be reversed? | It sounds like you are hardwiring the Tekonsha Prodigy P3 Trailer...

replacement for RV Propane Gas Detector Model LP_DOB Part31013 | Hey Kathy, to replace your current Atwood 31013 propane detector, you can use the RV Propane Gas Detector # RS64FR. This detector measures 4-1/4" long x 2-5/8" wide x 1/2" thick,...

looking to replace an OLD propane detector in a pop up, This is the part I have that is old and not working see pictures looking at your Atwood 36720 RV Propane Gas Detector - 12V DC, White. Will this work? Im not worried about mounting/size...

My gas detector is beeping. I’d like to replace it. The ones you suggest are not the same shape. Please help. I have the Protechtor series 2001 | Hey Anita, thanks for the information! The older Protechtor series 2001 propane detectors...

I am looking for a side bagger for a husqvarna Z4219 mower. Do you have one that would fit this model? Thanks | Hello Mark. The correct grass catcher for your Husqvarna Z4219 is the Rack'Em Grass Catcher # RCMMS4-EXS1. This comes with the 4.4...

I have 2026 F350 DRW l pull a 5th wheel will this effect the on board scale system | Hello John, thanks for reaching out, and congrats on the new truck. Yes, the Timbren Suspension Enhancement System # TFR350SDJ will affect the onboard scales...

Hi. I have a Graber Outback 4 bike hitch rack. Women’s bikes don’t fit great. Also straps broken. Do you have any replacement parts? I can use for this rack? | Hello Scott. We do offer a few compatible replacement parts for the Graber Outback...

I need a replacement Atwood propane gas dector model LP DOB Part 31013 or a compatible that fits the 3103 wall bracket. I can send you a picture. | Hey Alan, you can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013...

I need to replace my Atwood propane detector 31013. If I use the updated version, can I mount it sideways | Hey Robert! Yes, the RV Propane Gas Detector # RS64FR (white) and # RS44FR (black) can be mounted vertically to better fit that existing...

I need a grass catcher. I have a Torro atimecutter 42In. What model number will eork for me. And will I need to purchase anything elese to install. Thanks. Karl | Hey Karl, the correct Grass Catcher you'd need for your Toro Timecutter is the...

Looking for a rack I can mount a rooftop tent to on a trailer. Trailer is 48 x 96. Would like 40 inches or more clearance | There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an...

Which grass catcher to 36” Scag liberty Z | Hi Bob; what kind of deck is on your Scag Liberty Z? The right fit is dependent on the deck. We have the following available: -Rack'Em Grass Catcher for Scag Lawn Mower with Standard Deck # RCMMS4-OBS1 -Rack'Em...