Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

Locate the manual slide knob and power knob on the control. 3. While applying the manual slide knob turn power knob until display reads 4.0. 4. | I need to power down the unit...

While applying the manual slide knob turn the power knob until the display reads 4.0. | How do you adjust this item? | I can help you with the set-up/adjustment procedure for the Pilot 2-6 Brake Electronic...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

While applying the brake pedal or manual slide knob, connect Black Wire (Battery) to the tow vehicle. 3. | my controller worked fine a few months ago this weekend, the numbers appeared upside down, although the dotinch seems...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

Check to be sure that the power knob is not set all the way to the lowest position. | I just hook up a pilot controller and if i hit the break pedal the dot in the middle lights up, but if i use the button on the controller...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

I would try adjusting the knob to send more braking power from the controller and see if that fixes it. | When I hook up my camper in the driveway and hit the brakes ro manual slide only the tiny red dot displays in the center...

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

Then you would turn the leveler knob counter-clockwise until the controller indicator light starts to turn from green to red. | I have two controllers and I hooked them both up and have the same problem the light doesnt come...

With that being said, the gain can be adjusted if needed by using the power knob on the left side of the controller. If you are not towing, you can turn the power all the way down, but again, there will always end up being power running through it when the brakes are engaged. |

Since you have stated that you turned the gain up on the brake controller via the power knob on the side of the unit we can rule out the first error. | it shows like my brakes are connected and stuff but when I hit the brakes...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...

Got it connected and went to test it and it only goes from 0 to 0.3, even when the knob is maxed out. What are we missing? Thanks | 2012 f650. Replaced old controller for a digital readout pilot. Got it connected and went...

Reconnect Black Wire (Battery) DO NOT apply brake pedal or manual slide knob while connecting wire. Check the wiring of the power wire as it sounds like there is a loose connection there. | have been using the pilot for about...