Result: knobs

The knobs themselves are 2-1/4" in diameter and 1-1/2" tall. | how many inches are between the ladder rack knobs that screw into the deck rail. I want to know if my tool box can fit in between the rack when installed in a tundra...

Im looking for replacement knobs for a Rola Haul your might truck rack. Also wondering if knobs from another brand of rack might work. | Im looking for replacement knobs for a Rola Haul your might truck rack....

I like the concept of lockable anti rattle knob like those on Thule rack. Can the knob on Kuat Sherpa be replace to lockable knob like below or the kind ? | I dont really trus the lockable...

To install the rack into your hitch you will place the black hook into the pin hole of your hitch, tighten the anti-rattle knob until the rack is secure, and lock the knob with the provided key. | How easy...

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

In some of the videos I have seen, you are suppose to turn the bike clamp knob until you hear the clicking sound. Although the clamp is cushioned and If I where to turn the knob until it clicks, will this this clamping force be large enough to damage carbon framed bikes? |

I interested in 2 products I like on your page. Thule2 pro: The knob on the bottom that makes the rack snug in the hitch, when tightened is it enough to prevent big rack theft? | First I love your website. I interested in...

This should solve the issue with your adjustment knob and still give you clearance. This is the shortest length adapter we carry that will give you that additional ground clearance to protect your adjuster knob on your Kuat NV # NV22G. |

The metal ball will not respond to turning the knob. I cannot get the bike rack off the hitch. | The metal ball will not respond to turning the knob. I cannot get the bike rack off the hitch. The rack was put on too...

The Rola rack uses four locking knobs on each upright to secure itself inside the rails on your truck. | does the sliding tracrack fit a 2017 tacoma ?does the rear rack slide forward? | I do have options for you but they do...

If you didn't tighten the threaded hitch pin or the hand knob (whichever you have) then that would explain the wobble that you are experiencing. | I have a hidden hitch installed on my subaru crosstrek, I recently purchased...

Once in the trailer hitch you will spin the knob until the rack is tight inside the hitch. Then using the included key you can lock the knob so it will only free spin to deter theft. | Ive been looking at...

That knob is a really nice option for a front hitch with a hitch pin hole that is recessed back by the front bumper. | I have just mounted the front 2 inch receiver hitch on my 3500 2021 ram that I purchased from E-Trailers....

When you mention the metal ball not allowing a fit it means you need to turn the knob counter clockwise to loosen the hitch cam. | I have a 2018 Subaru Outback with a u-haul 2” receiver. I attached the adapter that came with...

It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | I’m looking for the window crank out assembly to open it. The threaded pin broke off inside. It’s a 2016 OpenRange 3X fifth wheel. The knob is fine. | Thanks for...

The Sherpa 2.0 even comes in your choice of colors: - Gray: Kuat Sherpa 2.0 Bike Rack # SH22G - Black: Kuat Sherpa 2.0 Bike Rack # SH22B - Pearl: Kuat Sherpa 2.0 Bike Rack # SH22P One of the best things about the Sherpa 2.0 is how it installs in your hitch, doing so with a simple turn of its knob. The knob also works as an anti-rattle device so the rack (and your bikes) stay stable and safe. |

Typically it's just the hand knob measurement that could possibly cause an issue. | Will this rack be a great fit on a 2015 toyota highlander? | Even though we have tested the Thule Helium Aero # TH9042PRO on a 2013 Toyota...

Then you will place the pin through the pin holes. Then simply turn the knob to engage the anti-rattle device. | Is the installation of the Beta rack same as the Alpha video? | Yes. On the Kuat Beta, # B202-114, you will insert...

| The locking hand knob on the shank is 4-1/2 inches from the center of the hitch pin hole as shown in one of the attached photos. | Will this rack fit? I have the Curt Class I hitch installed but based on the measurements...

The Kuat Beta # B202-2 uses the wedge style of anti-rattle. When you turn the knob at the end of the rack the wedge pushes out to reduce or eliminate movement of the rack in the hitch. | Is this product the wedge type adjustment...

It installs in your hitch with the swift and simple turn of a knob, making it one of the easiest bike racks to use; the knob also works as an anti-rattle device, giving you a very quiet ride. | Hi, I was looking...

The Kuat Beta for 1-1/4 inch hitches part # B202-114 does not use a threaded hitch pin as an anti-rattle device. Instead it uses a knob at the base of the rack that tightens a wedge against the hitch tube to take out the movement. |

To install it you just insert it in the receiver, tighten the knob, and insert the hitch pin, which is not threaded. | Is there a bike rack for 2 bikes that removes easily? We have a hitch and a Thule rack but even when not...

The Sherpa is a wheel-mounted rack like the Classic, but instead of a threaded hitch pin, the T2 Pro rack has a knob that allows you to easily tighten it in the shank. | HI, I have a 2016 VW GLI SE. I want to make sure that...