Result: knobs

If they still will not budge you may have to break off the knob and drill out the threaded portion. We do have the Replacement Knob # TAKB-90030-1 or the Locking TracKnobs # TH25700 you will be able to use to replace your knobs. |

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

We offer bracket # 853-5513, knob # 753-0783 and carriage bolt # 915-0660-31. | I have the Hull-a-port Aero 838 kayak rack made by Thule. The mounting kit that came with it has a flip fit mechanism to attach the kayak rack to...

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

If you are able to install and tighten the existing mounting hardware then what I suggest is to simply use some thread locker like # LT37420 to keep the knobs from backing off as you drive. It is generally safer to use the hardware made for the cargo basket. |

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

This consists of 4 sets of u-bolts, knobs and top and bottom plates. It may be necessary to drill a few new holes in your box to accommodate the new hardware kit. | I have purchased a 2014 Yukon and with limited space now wish...

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

The addition of new bolts and knobs would be beneficial as well and I see the kit includes all of this, but dont know if it will be large enough for this 4 3/4inch spread. | Would the #SR04952 kit accommodate a 4 3/4inch spread?...

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

If you are willing to drill new holes at whichever points will allow you to mount the box I recommend going with simple U-bolts, the Replacement Mounting Hardware for Car Top Cargo Roof Cargo Box # CTC-18PARTS which is just U-bolts, plates and hand knobs. You will definitely want to use the Loctite RTV 598 High-Performance Silicone Gasket Maker # LT37467 as sealant for the other holes in your rooftop box. |

The brake controller also needs to be mounted within the range specified in the instructions and not tilted or turned to the side. The leveler knob on the left side of the controller will also need to be in the proper position (straight up and down). |

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

Then you will need the Locking Knobs # TAKB-90030-1 (4) as stated in the answer you referenced. | Jason S. answered a question for another customer that was exactly what I was looking for in his answer to Recommendation...

Another option is to use other differently-sized U-Bolts, but that might involve drilling if they don't match the 4" holes in your box, and you would have to get matching plates and knobs. An example are replacement Rhino Rack bolts # RUBK which are 2-1/4" wide and 2-3/4 deep which are ideal for the generally narrower square or round bars. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |

Drilling is required and it installs with U-bolts and hand knobs. It will be a great choice for you...sorry I missed that in your previous question. | Hi I have a 2013 Toyota Corolla. What’s would you recommend for a rack and...