Result: loop strap

The Rack'em Manufacturing Removable Wheel Chock # RA-17 measures 8-9/16" from base to top of chock and fits tires up to 6-1/2" wide. | Will this work on with the front tyre size of my Go Buddy...

The # RA-17 Motorcycle Wheel Chock is designed to be used along with tie down straps to secure a motorcycle during transport. | My bike is around 700 lbs. is this chock sturdy enough for it...

| Yes you could mount a chock such as Rack'Em Manufacturing Removable Wheel Chock # RA-17 to the deck of the K2 trailer # K2MMT5X7 and then use it to transport your BMW motorcycle. | Is it...

Our range of motorcycle wheel chocks is shown on the linked page. These do vary a bit in terms of the compatible wheel diameters and widths. | Hi there Would those wheel chocks work on a Honda...

The front tire on your Honda VTX1300C is a standard size and it will fit nicely in wheel chock # RA-17. I also recommend using additional straps such as # 34414. | I have a Honda VTX1300C with...

Also 1/8inch steel plate under 3/4inch plywood floor. Use 2inch x 6inch strap w/ D-ring and ratchet. Is a wheel chock also necessary? | Plan to haul 2 Harley Ultra Classic. I was thinking of...

What would you recommend for a wheel chock for my 2015 Harley Davidson Electra Glide Ultra Classic. | What would you recommend for a wheel chock for my 2015 Harley Davidson Electra Glide Ultra Classic. | Most...

This consists of two bolt-down steel chocks that stabilize the rear tire and also allow for attachment of the included wheel strap. | I am looking looking at wheel chock solutions for my bike....

Will this wheel chock work with a 21inch front wheel? | Will this wheel chock work with a 21inch front wheel? | The Rack'Em Manufacturing Removable Wheel Chock # RA-17, does not have a height...

Yes, the base portion of the Rack 'Em Manufacturing Removable Wheel Chock # RA-17 is included with the chock. The base installs with user-supplied hardware (8 fasteners are needed) and the chock can be easily removed, leaving only the base on the deck of your trailer. |

Check out the install video to see how these will work together. For the two rear wheels, I recommend using an e-track system which is composed of the Erickson Horizontal E-Track part # EM19147 and then I recommend the Erickson E-Track Tie-Down Kit w/ Ratchet Straps, Wheel Chocks, and Roller Idlers - 1,100 lbs # EM58523-09162. |

Our range of motorcycle wheel chocks is shown on the linked page. For the safest transport you might consider the B&W Bike Bar # BWMC2301 which secures your ride without wheel chocks or tie-down straps rubbing on its paint or chrome. |

Im looking for a lock wheel chock that can accommodate my motorcycle on a trailer for hauling. | Im looking for a lock wheel chock that can accommodate my motorcycle on a trailer for hauling. The front wheel...

You would not want to rely on the Rack'Em Manufacturing Removable Wheel Chock # RA-17 as a means to balance your Honda Goldwing before you attach tie downs to it. | When properly bolted down in a trailer is...

I have a 2013 Honda Elite Scooter. Which wheel chock would be best for it to attach to my carrier? | I have a 2013 Honda Elite Scooter. Which wheel chock would be best for it to attach to my carrier? | Based...

You would just want to use some sort of straps like the # ETBMB-05852 to hold the bikes securely into the # RA-17 wheel chock. | I am looking for a e-bicycle mount to install in my rv toy...

The middle so I can use a strap to hold the wheel back so I dont have to use a wheel chock in the front. | Im planning on using your cargo control in my 7x14 in closed trailer....

Your best bet would be to obtain a small utility trailer and equip it with a wheel chock and some tie down straps. for a wheel chock, I'd recommend part # RA-17 and # EM05729 tie down straps. |

If that is correct, the Rack'Em Manufacturing Removable Wheel Chock # RA-17 is your best bet. This fits tires up to 6-1/2" wide so it will be able to handle the fat tire e-bikes. | Good Day. do you have a product...

If you find that you have sufficient towing capacity to tow a couple of dirt motorcycles, I recommend obtaining a small trailer locally and then using wheel chocks like the Rack'Em Manufacturing Removable Wheel Chock # RA-17, to help secure the motorcycles. |

Your best bet for transporting your motorcycle would be a small trailer equipped with a wheel chock like part # RA-17. There are simply too many variables with a street bike that size, and you may have trouble with the spare tire on the Jeep. |

A better solution for carrying your dirt bike would be to use a small utility trailer and a wheel chock like part # RA-17 and tie down straps like # EM05729. | Im looking at your class 3 Draw-Tite...

You'd also need some ratchet straps like # 297-7RSBB-M. A wheel chock such as # RA-17 would also be a good choice. | Can I use this hitch on a minivan. Specifically a 2017 Toyota Sienna? | The...

I recommend the Rack'Em Manufacturing Removable Wheel Chock # RA-17 this will fit your tire and hold the Vespa in place while the tow straps # EM05729 and D-rings # MMP543 secure it to the trailer. |