Result: Step Support

I've attached an installation video that offers a ton of information and goes step by step on installing this charger. | I have a 2018 Ram 3500 dually and wanting to know if I need a dc-dc charger to charge...

Those plates replace the factory shackles on your 2023 Chevy Colorado. Step 1-3 in the instructions for the RoadActive Suspension Custom Leaf Spring Enhancement Kit item # RAS4617 cover their use. | What...

I've attached a video below where Connor will walk you through the installation process of the # ETBC7 step by step as well as a video where David will walk you through the installation of the Redarc Tow-Pro....

This will be the most effective first step to reduce sway but you can still add other aftermarket kits later on if you still find a need. | will this help my Pleasure-Way 2001 Dodge 350 van RV from wandering when passed by...

I attached a picture that shows that step of the instructions for this kit. The roller has to be removed so that the spring of the RAS can lay across the leaf spring like it needs to. | I know the standard duty RAS3611 is...

I went ahead and attached the steps from the installation manual for attaching the kit with your overland springs. | Hello, I own a 2020 Silverado 3500hd with a 3,700 cargo capacity. My vehicle has two overload leaf springs...

If you want to install the necessary wiring for a brake controller, you can do it in two steps. The first step is to add a 4-pole harness. | What wiring harness do your recommend to install a brake controller...

Hello, My batteries are installed on the outside of my rv under my steps. Can these fuses be used outside where they will get wet from road spray, water, etc? | Hello, My batteries are installed on the outside...

I have stepped down from an F-250 to an F-150 2019 Platinum Crew cab with 5.5foot box and noticed a considerable difference when towing my enclosed trailer. | I have stepped down from an F-250 to an F-150 2019 Platinum Crew...

I’ve attached an installation video that walks through the process step by step. For the brake controller, I suggest the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. |

I recommend initially messing with the adjustment settings until you find something that is just right for your trailer application, but won't affect your unloaded ride performance. Just to cover all of our bases I also want to point out that your trailer needs to be loaded so that your tongue weight is 10-15% of the loaded weight, and that a weight distribution system like the Blue Ox TrackPro # BLU36FR is the first step into achieving a level towing setup. |

I am trying to avoid a weight distribution hitch due to the extra steps associated with hooking up the trailer. I would prefer to it on the hitch and go if that option is available via air bags. | I am looking for air bags...

If it does, you can skip to the next step. If it does not have one yet, you will need to start with one and the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55124 is a quick and easy one to get installed. |

The issue is that there isn't an adapter made, and hardwiring is also a problem due to the fact there isn't a reachable stoplight switch wire (the wire that gets power when you step on the brake pedal) on your vehicle. There is one simple to use option, which is from Curt: - Curt Echo Wireless Trailer Brake Controller # C51180 The Echo # C51180 will simply plug into the 7-way if you have a factory tow package on your XC90 with a working 7-way, or you can add one with a couple parts: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118683 - 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L This will give you a working 7-way for your Volvo, and the # ETBC7L doesn't require the same wiring as a traditional 7-way because the Echo doesn't use the stoplight switch, it only needs +12V, ground and turn signals connected to the 7-way. |

It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case. | Hi I would like to get a list of all of the needed parts that I would need for my BMW X5 35i to Be able to tow the 6000...

When I restart the vehicle, the warning is gone, but comes back if I press the button for 3 seconds Is the light switch defective? Is there a step that I am not doing well. I checked the connections and everything is fine. ...

It has a boost stage that provides a constant charge, then steps down to an absorption charge profile that keeps voltage stable but adjusts the current. | I have a 2019 Jeep Grand Cherokee WK2 with factory tow package. I wanted...

I have linked an installation video below for the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 that will accurately walk you through all the steps necessary to install a brake controller as well as the connections needed under the hood. |

If you don't see 12V power on the brake controller pin then you know the wiring wasn't run and you can follow the steps mentioned above as if you don't have the tow package. | I have ordered and received several items, but...

Since you already have the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118618 on your Ram you are one step ahead of the game. The only other thing you will need to add is the wiring kit and brake controller itself. |

This ensure the output voltage is not effected by voltage drop. Some other steps to consider include changing your battery setup to have only one cranking battery and one auxilliary battery with the BCDC in between. | My...

I have wiring for 7 pi plug in a blank cover on the step bumper. Please let me know a recommendation for brake controller. | I have 2018 Chevy Silverado that has the tow module above spare tire. I’m looking...

It is a plug and play setup, so you will not have to splice any wires to install this wiring harness on your Subaru Crosstrek Sport. The next step, is to setup your vehicle for towing a trailer that has brakes. | I have a...

Once that is done the trailer will mirror the running lights, turn signals, and brakes on your vehicle. We do have another step if you want to tow the pop up trailer. We will be adding power for the brake controller, the mirroring of the tow vehicle's reverse lights, and a hot lead to the battery. |