Result: level

It is adjustable with up to 6" of drop to level your trailer. I do recommend using the InfiniteRule Lock Set for Curt Rebellion XD Ball Mount # IR47FR to secure the hitch assembly to your Sierra. | Hi I have just swopped...

After pulling car with RV, car will be removed from the dolly. But the tow dolly may be left connected to the RV hitch. | How can the tow dolly be Locked securely to prevent theft? 2 main concerns for theft. 1....

When looking for a proper ball mount for towing you need to make sure it has the correct drop so that your trailer tows level. To choose the correct drop for your towing setup you need to measure from the ground to the top of the inside of your receiver and then from the ground to the bottom of your trailer coupler (be sure to take measurements on level ground). |

Trucks are higher off the ground these days and Im left with a hitch that doesnt give me quite the leveling on my trailer that I had with my older truck. | Is it necessary to use both pins on the portion of the hitch? Or can...

We can certainly help you make sure you get all of the parts you need to flat tow your 2019 Ford F-150; a complete flat towing system consists of base plates, a compatible tow bar, safety cables, supplemental braking and possibly a high/low adapter to keep the tow bar level during towing. I linked an article below that will help you choose the correct one as well. |

My boat trailer tongue is level about 18” off ground. I need a riser rather than a . | I have a 2013 Sienna LE AWD. Receiver is about 12” off the ground. My boat trailer tongue is level about 18” off ground. I need a riser...

While ideally you want to be perfectly level, if you're up to a half-inch off you'll still get good performance from your truck and trailer. | I’m looking at your Tri-ball hitches. I see you have a 3” shank with a 4-1/2” drop....

This adjustable ball mount will allow you to adjust your height to allow you to tow your trailer level. It includes a 2 inch and 2-5/16 inch hitch ball option. | The part number I'm looking at is 13364, Class III, 2". It...

The top of my 2 hitch to ground 18 to level ground. Scamp Trailers recommend you have the biggest hitch available with a 2” ball installed on your vehicle. | I have a mid-size Chevy Colorado 4WD that will be towing a Scamp...

Decided I should measure, or try to, and get as close to level as I could. Have always used a 2 inch drop before but maybe I should have been using a little more. | Got a new 22 Silverado Z71. I will use it to pull my 2003...

Another thing to take into consideration is the rise or drop that may be needed to tow the travel trailer level with your vehicle. I recommend to use an adjustable ball mount Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls Item # AM3461 which features a 2" ball and 2-5/16" ball with 4" of rise or drop. |

So for towing your travel trailer what you will need instead is a ball mount that has the 13 to 14 inches of drop required to tow level. For your 2 inch hitch there is one option available with the correct drop, from BulletProof Hitches: - BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch - 14" Drop/Rise # HD2014 This ball mount has a maximum of 14 inches of drop and comes with a 2 inch and 2-5/16 inch hitch ball that will allow you to tow your travel trailer. |

My problem is that due to a very severe dip at the bottom of my driveway, the clearance between the bottom of the hitch and the ground is pretty tight, when going through that dip, even though I have plenty of clearance on level ground. I cannot seem to find drawings anywhere that help. |

The parts you need are the following: - EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7273 - InfiniteRule Hitch Lock for 2" Hitches - 2-5/8" Span # 34061071-D - Curt Ball Mount for 2" Hitches - 8" Rise # C45112 (you will need to have this rise to make the trailer more level) - 2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank # 40038 - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118767 - SmartStraps Ratchet-X Ratchet Tie-Down Straps w/ S-Hooks # 348345 With these parts, you will be able to safely transport your sailboat on your 2016 Honda Fit. |

This ball mount will give you 8 inches of adjustability to tow many trailers level. It has a 2 inch hitch ball compatible with the K2 trailer, and also a 2-5/16 inch hitch ball for other trailer applications. | Im interested...