Result:

You will want it to be as level as possible. To get a more level set up you can use a high/low adapter to compensate for the 3-1/2 inches of difference between the base plates and the hitch. | I have a 2012...

You'll need to determine the height difference between the hitch on your RV and the base plate height, then choose the proper high-low adapter to place the tow bar within 3 inches of level. | Is there a TowDdaddy...

Lastly the you may also need a high-low adapter to level your tow bar to your RV so I have included a link to a helpful article on measuring for the correct adapter, and a link to all of our high-low adapters for you to take a look at. |

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level. | Will this hitch...

Is this flat wheel towable behind our RV? | Is this flat wheel towable behind our RV? | Yes it is and we can help you put together a complete package to flat-tow your 2009 Jeep Liberty. Please note the link to help article...

This is a non-binding tow bar which means you won't have to be perfectly level and straight to connect or disconnect the tow bar. | what is the difference in this and a 521533-1 | There are several differences between the...

I recommend the following: -Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521423-5 -Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs # RM-520 -RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs # RM-643 -Flint Hill Goods Magnetic Tow Lights - Red/Amber LEDs # FHG96ZR (if you don't mind magnetic lights) or -Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56203 -Brake Buddy Stealth Supplemental Braking System - Proportional # HM39530 You will also need a high-low adapter to keep you level. |

In addition, you will also receive the proportional action of the SBS Stay-IN-Play which applies the Liberty's brakes at the same level that you apply the brakes to your RV. This activation method will not have a timed delay like other systems. |

Looking to tow a Jeep Liberty 05 to 07 behind my RV. What parts are needed? | Looking to tow a Jeep Liberty 05 to 07 behind my RV. What parts are needed? | In order to flat tow your Jeep Liberty behind an RV/motorhome, you need...

Need to know which items I would need to flat tow my 2006 jeep liberty 4wd behind my class A RV. I have a 2 hitch on the RV, and a 4 pin light cable, but nothing on the jeep. | Hello. Need to know which items...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Will a blue ox towing equipment...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | I need some help with what parts...

What parts do I need to flat tow this vehicle behind an rv? Thanks. | What parts do I need to flat tow this vehicle behind an rv? Thanks. | There are a number of parts required to flat tow your 2006 Jeep Liberty, which I'll...

You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry. | Can this adapter be used with Roadmaster Stowmaster 5000,...

You may also need a high/low adapter to keep your tow bar level between the RV and dinghy; I've linked our entire selection of those as well as a helpful article on how to correctly measure to find the appropriate one. |

If you have a 4-wheel drive model it can be flat towed with 4 wheels down behind an RV. If it is a 2-wheel drive model it cannot be flat towed. | I have a 05 keep liberty renegade thinking about flat towing it behind my motorhome...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | rather than flat towing, can you tow on a dolly...

Here are some other parts you will need to flat tow your 2012 Jeep Liberty: Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Blue Ox Patriot Supplemental Braking System item # BLU37TR High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Here are some other parts you will need to flat tow your 2012 Jeep Liberty: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e47ZR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

For a complete setup I recommend the following: -Blue Ox Base Plate Kit - Removable Arms # BX1122 -Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 (if you decide to get a new one) -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-15267 -Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes # SM99251 -Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 You may also need a high-low adapter to keep your setup level. |

This tow bar has a capacity of 6,500 lbs and attaches to the trailer hitch on your RV. The self-aligning design makes it much easier to hook up, even when on surfaces that are not level. | I have a 2012 Jeep...

There is a minimum of 5 things needed to safely flat tow, previously addressed and listed below. 1) A base plate kit installed on your toad 2) A tow bar to connect your toad to your RV 3) Safety cables in case the tow bar fails 4) Wiring to synchronize your RV’s and toad’s lights 5) A supplemental braking system to synchronize your RV’s and toad’s brakes Additional components are always available to adapt or enhance flat tow equipment. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | best base plate and tow bar to use together on...

Wiring Harness - Hopkins Custom Tail Light Wiring Kit for Towed Vehicles item # HM56204 Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |