Result:

I plan to obtain parts to convert my new 2023 Ford Bronco to flat tow behind my Mercedes Sprinter 3500 based RV. When measuring the height of the Class 3 hitch on the RV, centerline is approximately 17 off of the ground. |

They're not setup for weight to be placed on them. To level your vehicle you'll want to use the Thule RV Wheel Levelers item # TH307617. | Can these be used for vehicle leveling in the...

I bought your Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K. The Raodmaster Base Plate Arms on my 2023 Bronco Badlands are 5 inches higher than the hitch on my 2023 Entegra Odyssey 24B RV. |

I need to purchase something that minimize the zag when towing my rv. Thank you | My bronco has rear coils and I dont see where this can be installed as they are lines running in the frame area where this can be installed....

Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

This is a pretty common thing on RVs and if you take a look at the accompanying photo, you can see the MaxxFan installed on a trailer with a roof that has curvature to it. | If my roof has a bit of a curvature to it, will...

High low adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

In order to be considered level your RV's hitch has to be within 3" up or down to the base plates on your 2024 Bronco Wildtrack. | Does the second vehicle kit come with the vehicle coach link transmitter? Also,...

I have a 2021 full size Ford Bronco and a 2022 Newmar class A RV with a tow package. I am looking for a complete set of all parts required to flat tow the Bronco behind the RV. | I have a 2021 full size Ford...

Here are some other parts you will need to flat tow your 2024 Ford Bronco Outer Banks: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item # BX7380 Base Plate Kit - Blue Ox Base Plate Kit item # BLU23XR Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

I am interested in flat towing this behind my Sprinter 3500 RV rated for 5000 lbs. I looked over some of your products for both Blue Ox and Roadmaster Nighthawk items. | I recently purchase a new 2023 Ford Bronco 2 door with...

Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Is there equipment available to...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Looking for a full tow bar set up with wiring harness...

Charge Line Kit - Roadmaster Battery Charge Line Kit item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Can you attach a tow bar directly to a Ford Bronco...

Can you tell me what all parts I will need to flat tow my 2023 Ford Bronco base model behind a FR3 motorhome? | First you will need either the Base Plate # RM79RR for the factory plastic bumper or the Base Plate # RM92ZR if you have the Ford...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Non-binding system needed to flat tow 2023 Ford...

Wiring Harness - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR or for Incandescent tail lights item # RM26FR Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

Also what is the best wiring option for both flat dingy tow with my RV and for trailering with the Bronco non LED pulling a trailer. | I get a message pop up that this base plate will not fit my 2022 Bronco 2 door with the modular...