Parts Recommendation for Flat Towing 2023 Ford Bronco

Published 01/23/2023

Products Featured in This Question

Blue Ox Base Plate Kit - Removable Arms

(4614)

$608.95

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(397)

$1647.96

Blue Ox Avail Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,000 lbs

(751)

$954.61

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3186)

$180.17

Question:

I recently purchase a new 2023 Ford Bronco 2 door with the modular bumper. I am interested in flat towing this behind my Sprinter 3500 RV rated for 5000 lbs. I looked over some of your products for both Blue Ox and Roadmaster Nighthawk items. Which products do you recommend for my needs?

asked by: Bill K

Expert Reply:

The Blue Ox base plate kits and tow bars I think are the easiest to use and are very well made so that would be the route I would recommend for your 2023 Ford Bronco with the Ford modular bumper. So the correct base plate fit would be the part # BLU23XR.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.