Result: bubble levels

I am having an issue with my Hopkins Smart Level. The bubble on the bubble lever is perfectly centered and when I use a 48 inch level on my trailer it is also perfectly level. The lights on the level are NOT green and show that the trailer...

Does the WM67200 need to be installed perfectly plumb or is there adjustment for the front to back level bubble? | Hey Bob, There isn't any built in adjustment with the Wheel Masters Level Master 2 Trailer Bubble Level # WM67200, but you can...

Does the 5th wheel had to be level to be able to install this item wm6700 ? Thanks in advance. | Ironically yes, you do need to use a level when installing the Wheel Masters Level Master Trailer Bubble Level # WM6700. Basically you want to use...

Do you carry the brackets for pin box mounting for this item | I do have an option for you but the Camco AccuLevel Trailer Bubble Level part # CAM25563 does not come with brackets or hardware to install. I recommend Wheel Masters Level Master...

Wheel Masters 6780 Level Master and Bracket Kit. Is mounting bracket metal? | The mounting brackets for the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 are made out of UV-protected plastic....

Is this level large enough to see from a rear view mirror? What are the dimensions of the product? How is it attached, can it be stuck on without using screws? thx! | The Hopkins Never Fade Trailer Bubble Level Set # HM08526 measures 3-3/4"...

bubble level and green led lights do not match, when green lights are on bubble level is not centered? | What you are experiencing just means that you need to calibrate the Hopkins Electronic LED Smart Level # HM08201. To do this you need to...

Im working on a 2016 Salem Hemishpere, Im looking for Level bubbles | Hey Ryan, so we have the Hopkins RV level kit part # HM08525 which is a bubble level set for the front and rear of the RV. |

what is the length including the bracket where the mounting holes are at? | The overall length of the Camco AccuLevel Trailer Bubble Level # CAM25563 is 10 inches in length overall and 3 inches tall. |

Will this fit a Reese pin box ? | Yes, the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 that you referenced does fit Reese pin boxes. |

Is there any way to calibrate the bubble level on this jack. I know, from the use of three other levels, that my travel trailer is level but this level shows quite a bit out of level. | I spoke with my contact at Stromberg Carlson regarding...

I have a coleman 202rd with a metal exterior. Will these levels stick to metal? | Hi Jason; yes, the Hopkins Never Fade Trailer Bubble Level Set # HM03926 adhesive backing will stick to your metal exterior. |

Could you tell me the dimensions of your Hopkins Never Fade Trailer Bubble Level Set - Graduated - Two Way - Stick On/Screw On Item # HM08526 I have one on my camper, but the fluid is gone in it. Mine is 3 3/4 by 1 5/8 Thank you for your time....

DO YOU HAVE A REPLACEMENT CAP #EJ-3520-BCP THAT HAS A BUBBLE LEVEL? | I have a much easier solution. What you'd want to do is install the Hopkins Never Fade Multipurpose Bubble Level # HM09516. This will adhere to the top of your jack and...

Hello- I am looking for a new bubble level which mounts on top of the Atwood premier series 3000 pound power jack. It mounts with 3 small screws so I am assuming that a replacement would be available. Can you check that out for me? Best...

We purchased the stromberg electric tongue jack. The problem is we have a bike rack attached to it and the bubble level is to high. Is there another plug that would work that is flat? | Would the Hopkins Stick On Never Fade Level part # HM08526...

Is there a way to attach this with adhesive. | I am sure you could use adhesive to attach the Wheel Masters Level Master 2 Trailer Bubble Level # WM67200 to your fifth wheel if you wanted to but we don't have an option for that. You could use...

Can the level be read from the cabs rear view mirror? | Depending on where you install it on your RV yes, the Hopkins Never Fade Trailer Bubble Level Set # HM08526 that you referenced can be read in a rear view mirror. |

What is the mounting hole pattern on level CAM25563? | I went out to the warehouse and measured the Camco AccuLevel Trailer Bubble Level item # CAM25563. The mounting holes are 10-3/4" x 1-3/4". The holes are oblong and are a 1/2" long vertically....

Can the level be read from a rear view mirror in the cab of a truck? | Yes, the Wheel Masters Level Master Trailer Bubble Level part # WM6700 could be read from the rearview mirror of your truck. It's 11 inches long and 2-3/4 inches tall so...

Im looking for a large RV level, one that can be seen from the rear view mirror, that incorporates a non-screw attachment some kind of super sticky backing to eliminate poking holes thru the trailer shell. Any recommendations?? | The largest...

Where/how can I replace the bubble level piece that is on the top of my Bulldog 4,000lbs Powered A-Frame Jack - Black Case? Some of the green liquid has evaporated from our AZ heat. I cannot find it on your site. Thanks. | The replacement level...

What are the best fold down solid steps? My auto levels the front of camper won’t auto level front bottoms out. Two foot level it’s in the bubble is that close enough? Door opening is 29 inches and height is 29 inches. | Since your doorway width...

Do you have to drill holes in your pin box? Want that void your warranty if you drill holes in the pin box? | Yes, it does. The 5th Wheel Pin Box Mounting Bracket for Wheel Masters Level Master Trailer Bubble Level item # WM6700BK does require...