Will Wheel Masters Level Master Trailer Bubble Level Fit Reese Pin Box

Question

Question:

Will this fit a Reese pin box ?

asked by: Josh K

0

Expert Reply:

Yes, the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 that you referenced does fit Reese pin boxes.

expert reply by: Jameson C

0

Answer 1

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...

Answer 2

Hello Joe, thanks for reaching out. The Demco #DM8550046 you mentioned is for a flatbed truck with a recessed gooseneck ball so this would not work for your setup. Instead what you will want is the following: - Demco Recon Gooseneck-to-5th Wheel…

view full answer...

Answer 3

Hey Rick. We have the upgraded model with the air bag that fits a Lippert 1621HD bolt pattern. It's the Shocker Hitch 5th Wheel to Gooseneck Coupler Kit w/ Demco eZ-Latch for Lippert and Rhino Box - 24K item #SHK99YR. Almost an identical setup to…

view full answer...

Answer 4

Hey there Martin! Yep, if you're using a Furrion RV Observation Camera with your 2025 Chevy Silverado 2500 HD Custom 4x4, you'll likely need the Furrion 7-Way Vehicle Power Adapter with Power Switch part #FR87PR. Newer Chevy and GMC trucks…

view full answer...

Answer 5

Hello Nelson. I have included a dimensional drawing of the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR below for your reference. Your best bet will be to compare this to the bed of your truck and see how everything lines up.

view full answer...

Answer 6

I have a solution to help with the chucking that you are experiencing as there is not a Reese Goosebox that fits the same bolt pattern used by the Leland 7920 Pinbox. The bolt hole spacing on your pin box is different vertically and horizontal from…

view full answer...

Answer 7

A solution for you is to get the Replacement Base For B&W Companion 5th Wheel Hitches #BWRVB3715. This will work with your factory puck system and will leave your bed rail-less whenever you don't have your hitch in the bed. Another solution…

view full answer...

Answer 8

Your Reese 16K Pro Series hitch RP30093 utilizes industry standard rails, so there are many options for your hitch upgrade. Because you are having a lot of chucking issues with your trailer and 2007 Chevy 2500 Classic, I recommend the Reese 16k…

view full answer...

Answer 9

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 10

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 11

Hey David, it is very possible to replace the Dometic RV AC units you have now with the Furrion Chill Cubes you mentioned but you would need to replace all parts of the system as none of what you have can be reused with the Cubes. So you would need…

view full answer...

Answer 12

Hey Eli! The Advent Air RV Air Conditioner System #ADV92SR you ordered is not compatible with a Dometic Duo Therm. However, it really doesn't matter. This is a new R32 refrigerant unit so it won't be backwards compatible with any of the old…

view full answer...

Will Wheel Masters Level Master Trailer Bubble Level Fit Reese Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching