Search: scissors jack > RV Leveling Blocks > Stackable Blocks x > 1 Block x >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Allen, thanks for reaching out. For bolting on the etrailer Scissor Stabilizer Jacks #e36VV the recommended hardware is self-tapping 3/8" x 1" screws. If you use that, you won't need any bolts or washers or anything. You'll want…
view full answer...The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
view full answer...Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
view full answer...The Coach Air Kit for Air Force One Supplemental Braking System part #SM99627 includes the motor home installation components that come with the full kit Air Force One system part #SM99243. Keep in mind the coach air kit is only half the kit of a…
view full answer...Hey Greg, The etrailer Scissor Stabilizer Jacks #e74RV would be a nice fit for you. These do not have a requirement for installation since their is a 6 hole mounting plate, it can be adapted to install on most applications. With the 7,500lb support…
view full answer...In order to find the correct bearings for your 2007 Featherlite trailer, you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on…
view full answer...I went out to the warehouse to measure the drive nut on the Scissor Stabilizer Jacks #TJSCHD-24. From wrench flat to wrench flat it is 0.72 inches so just a hair under 3/4 inch and just a hair above 18mm.
view full answer...The Ram Jack #TJSC-24 measures 3/4 inches. A 19 mm wrench or socket can also be used. The recommended manual crank handle for this unit is #TJSC-24-HD this has the proper size socket for use with these jacks. I have linked the above mentioned…
view full answer...Unfortunately Dean there is not a single vent cover used for your Greystone. You will need to compare your current vent and cutout to find the correct replacement vent from the list below. Ventline Exterior Wall Vent #V2111-55 (Cutout: 10-1/2" x…
view full answer...Hey Martin, we can definitely help with that. Your exact tire size is only available in an off-road style but the next closest size is the ST225/75R15 which we offer with the #TR225LRE. This would be just a tiny bit smaller than what you have now but…
view full answer...Hey Jered, cool name. The Peterson LumenX LED Clearance and Side Marker Trailer Light item #PET59JV is going to fit a 2-1/4" diameter hole. The light itself is 2" in diameter and the included grommet will hold it in place. What kind of…
view full answer...Yes, the Pro Series Anti-Rattle Device #PS63091 that you referenced will remove the play you described having between your weight distribution shank and hitch.
view full answer...Filters
- 11 results
Vehicle Fit
Filters
