Result: wheel

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

Hey Sterling, thanks for reaching out. The Terran Industries Trailer Hub and Drum Assembly #TX28VJ has 9/16" studs. I am not sure why our page says 1/2" but I will work on getting that edited. Sorry for any confusion. The hub fits a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…

That number doesn't give me a cross-reference. To get a replacement you will need to pull the bearings out of the hub and on the face of both the inner and outer bearing there will be a number printed on the bearing face. If you can give me those…

Hey Joseph, the m1102 trailer has a wheel bolt pattern of 8 on 6-1/2 inch which is what the Lionshead Mod Wheel part #LH44ZR has so this would work for the trailer. Do you have tires picked out already?

Hello Tim, thanks for reaching out. The part number SAE 2 AS2T216 10 comes back as the optronics Low Profile LED RV Tail Light #RVSTLB60. The black part would be called the base of the light and this is only sold as part of the whole tail light…

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

Hey Greg, yes the Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel #AM20258 that you referenced would work with a Load Range E tire ST175/80R13 like you mentioned.

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Hello Branson, We are currently working on improving our fit guide for RVs, and it looks like you’re searching for bearings. I’d be more than happy to help with that. We do not have a database that tells us exactly what components are installed on…

We do have 12-1/4 x 5 inch electric drum brake assemblies available, however we have found that with higher-rated assemblies like these the AL-KO units aren't able to be easily swapped with other brands. The etrailer.com Electric Trailer Brake…