Result: Step Support

Looking for scissor steps for my 2001 King of the Road, Royalite, R33BW fifth wheel camper. The existing steps are 25-3/4" wide. I only have 1-3/4" to work with when the door is closed. Not sure that will support the bracket to attach the...

Can the bracket for the Brophy scissor step be mounted directly to your pickup? I would mount them just above the bumper and below the 4inch overhang of my slide in camper. I have a 2005 Tundra. Do you have a photo of such an installation?...

If the ground is uneven how do you level the bottom step ? Would you use a shim ? Thanks for your help | If the Brophy stairs # SS02 have to open to uneven ground then using something to support the side not touching the ground is a good idea....

do scissor steps have to go all the way to the ground or can they be hanging as I see some on motor homes | The Aluminum Scissor Steps, 24 inch Wide, 31 inch - 39 inch Tall, are not designed to hang. These steps are designed to fit just below...

Interested in the Brophy 4 step for my camper, when the camper is on the tailgate is down and I was told by Brophy Machine works that I needed a Tailgate Adapter #TSSB so my question is what does this look like and where does it mount, cant...

Hello, Im looking for a 4 step **removable** scissor step solution for my truck camper. I really like the Torklift Landing Gears on the Torklift steps Im looking at, but it isnt really designed to be removable like the Brophy model. I watched...

I just bought a 87ish palomino and have it on a 2005 1/2 ton Silverado and the tailgate sticks out past the camper about 6 inches. So will these steps fit on this setup without the tailgate interferring? | On the Brophy scissor steps # SS03,...

Good morning, I am wondering if these type of scissor steps 5 or 6 #AS25 or TLA7806 can be used on a pontoon , getting in and out of the water? | Technically, you could install scissor steps such as # TLA7806 or # AS25 on anything that you...

I have a homemade camper on a 2003 dodge 1500 pickup truck where the tail gate is used as a platform to get in and out. My hitch has cargo carrier on the back already to haul stuff. Was thinking of turning the carrier upside and use that as...

I have 36inch rise from ground to bottom of door. What I read is 34-1/2inch on four step unit. Will four step work? | TorkLift GlowStep Camper Scissor Steps - 4 Steps - Aluminum - 20" Wide - 350 lbs Item # TLA7804 has an ideal mounting bracket...

I have a Bigfoot truck camper with a basement, its on a Ford F350 4x4, the current stairs are mounted about 48 inches high. They are wobbly and do not align to level when you extend the steps. They are also narrow. Below the current mounting...

Lance 1191 truck camper. Can the scissor stair extend/mount/rest on the upper STAIR that is actually INSIDE the camper? Our 13 yo lab needs a much more gentle slope/grade. It looks like I might be able to extend upward and rest on the factory...

I have a Toyota Tacoma 4WD with a Four Wheel pop up slide in camper. I was wondering if the Brophy scissor step could be mounted to it in some way. What is the measurements of the mounting bracket? | The Brophy Camper Scissor Steps # SS03...

Hi, on the AS04 Brophy stairs could I mount the bracket to an angle iron mounted to the bottom sub floor of my 2001 Lance 815 truck camper, there is not enough room to mount your bracket to the lip of the doorway, so it needs to be mounted below...

We have an 01 Newmar Kountry Star 5th wheel with a 3 step fold out stair system. We do not want the morryde lift up stairs and are considering the Brophy steps because of the wide tread depth and low rise. My question is, can we leave the...

Hello. I tow 5000lbs gross weight camper. Suv is rated 7000 lbs and 700lbs tounge weight. I have weight distribution hitch and spare tire carrier HitchGATE Solo brand. I need 5inch and enought room to clear gas tanks on the trailer during...

First thing what is the weight capacity for these clamps and also that that have to be specific for your track I have a 20-21 Ford F-350 Super Duty | The Brophy Clamp On Camper Tie-Downs # HSWB do not have a weight rating since they do not support...

1991 Lance camper on 1982 Ford F-250. Your Swagman s63400 tilting rack looked like a possible solution on the back of my rig. It looks like it would tilt enough to allow access to the rear door of the camper. There is also a spare tire on...

Will these work on my 2008 silverado crew cab to hold down a Palomino Bronco 800 pop up slide in camper. I like the idea of not drilling holes anywhere. | The Brophy Stake Pocket Camper Tie Downs, part # TDSF, will fit most full-size pickups...

I have a 2004 Acura TSX and recently purchased an Aventon Level Step-Through e-bike weighing 62 lbs.. Im looking to purchase a bike rack, possibly 1UP USA 2inch Super Duty Single platform bike rack rack weight 28 lbs., with 75 lb. bike weight...

Hi, I am thinking of purchasing this hitch for my Nissan Versa Sedan. I currently have a Sportrack A30604 Model 4 Bike Carrier, which I used in an old Van that had a Class 3 2-inch hitch and receiver. I am planning on carrying max of 3 bikes....

Am considering using Brophy #HSSF tie-downs on a 2015 F150 extended cab aluminum body to carry a Travel-lite 770RSL hard side camper, dry weight 1385#, floor length 7foot 7, truck box 6 1/2 ft. Truck has a factory bed liner. Almost all driving...

Hi team! Hey I am buying a 2017 mazda 6 grand touring. I want to install a trailer hitch to carry bicycles. I see you have a hitch made for this car, model 13901. However this is only a 1 1/4 inch size. My current bike rack is a three...

Help please, ...I dont understand! I have three holes in the bumper of my Chevy C1500 LB pickup for mounting hitch balls. The holes are for 3/4 in. dia. shanks. I have a 2 in. one mounted, and I need to mount a 2 5/16 in. one as well. But Im...