Result: camera

I have a 2013 Mercedes-Benz Winnebago View is a wiring component available to have the existing backup camera activated for constant viewing when towing a car? Thank you | You can absolutely change the backup camera on your 2013 Winnebago...

Im thinking of buying 2 of the HM50002 for my 03 ford focus, one for the rear just for backing up dark tinted windows so I can see, and one for the front, when pulling onto my tow dolly. My question is can I get by using just one monitor using...

I am trying to wire a back up camera and dont want to splice the wiring. There are several kits that would T the connection...I need both +12, ground, and back up lights for the camera...I am not sure which kit to buy. Also on the other end...

Why do I get an orange square on the screen while camera is working? | I called my contact at Peak Performance and they stated that the reason you are experiencing the orange square in the middle of the monitor on your Peak Performance Digital...

wanting to install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System Item # HM50002 my question is I only have the four pin trailer wire connector how would I go about installing this system so the reverse lights would activate...

I recently purchased a VueSmart camera from etrailer. My Flasgstaff trailer is pre-wired for a Furrion backup camera, with what appears to be a female electrical plug. Do you sell a plug/adapter that would plug into this Furrion plug and could...

I want to connect the positive red wire from my backup camera, to the reverse lights, on a 2006 Honda Odyssey. The 2 wires connecting to the reverse light are black and green. Which one is positive and which one is ground? Plus what type of...

Help! I am in need of how to install the Peak Backup Camera Part #PKCOBU7 Insideh my horse trailer. I have been searching the web for ANY information on how to do this and I have found nothing except to install it to the 12v battery but...

steps to hardwire the backup camera | Hopkins Smart Hitch Backup Camera # HM50002 is made with a plug-in 7-way connector to provide the reverse light signal to trigger it, but it can still be hardwired. The red wire on the Hopkins needs to connect...

Hello, I bought the HM0002 backup camera For a: 2015 Ford F-150 xlt super crew truck. After pluging in our trailer for the first time, we found that the left turn signal doesnt work, everything else works. Checking connections several times...

With the LED lights on the back of my cargo trailer with the tailgate ramp how would you hook p the camera | The VueSMART RV and Trailer Backup Camera part # HM34FR does require the running light circuit for activation. So while I am not totally...

My Jayco TT is prewired for a Furron ? back up camera - there is a bracket in the back into which the camera would be installed. Does the Vue Smart work for that? Anything that needs to be done to make it work? Thanks | Even though your...

Regarding my newly purchased Hopkins HM50002. My 2005 Toyota Tundra has the 7 way connector adapter, but it does not have a factory hitch. plug comes apart in the back allowing its use. Would you have any step by step instructions on how I splice...

I have a 01 chev silverado full trailer pkg 7 pin I bought a wireless backup camera system, which involves a dash unitpowered by cig lighter or hard wire and a license plate camerapowered by backup lights. I would like to have the option...

I need to install a relay for my backup camera on my 02 Silverado 3500, but cannot find a 12 volt constant power source when the truck is on to connect it to. So far, Ive seen that the power wire for my stereo might work as one? | The most common...

i was wondering if you could help me. i own a 2017 dodge journey. im installing a backup camera to my new journey and was wounding if you have a wiring harness that will connect to the reverse light that is on the inner driver side on the tail...

I am looking at the Hopkins 50002 Smart Hitch Camera System and i just looked at the videos. I was wondering if you have a video showing the install on a Toyota Tundra? Where is the best place to bring the wire into the cab? Thanks for your...

I have a 16 Silverado,no carpet on the floor only rubber,don’t really want to cut the rubber flooring,how else can I bring it into the cab,not really any access through the firewall? | If you are referring to the Hopkins Smart Hitch Backup Camera...

Hi there! I have the GM wired camera system for my 5th wheel. We have a 2025 GMC Denali 3500HD. I installed/wired the camera from the RV back bumper, underneath the RV, towards the front of the RV, ending in the compartment that hold my...

I am interested in the Hopkins Smart Hitch Backup Camera, its monitor size and systems. I like a wired system as the Truck has Blue Tooth and everybody says that interferes with a wireless system. I like the fact that the power system for both...

In the installation video, you reference a splice connector part #564. I can’t find this on your website. Can you point me to the correct part? Thanks in advance. | The Self-Stripping Connector with Waterproof Sealant part # SWC501746-1 can...

I would like to access the 12v power on my 7 way trailer wire harness so that I could power a backup camera at the back of a boat trailer. Do you have some kind of wire harness that I could use to do that? | Hey John, welcome back. There's...

I want to purchase posi-lock connectors to tap into the back up light on my outback to connect a back up camera Garmin bc30. The power wire is brown with a yellow stripe and the ground is black. PLEASE TELL ME THE GAUGE OF THESE WIRES SO THAT...

I want to run the lights inside my trailer but need my truck plugged in. Is there some type of adapter that I can plug my jump pack into the 7pin connector on my trailer or is there another setup you recommend. Was also wondering if you have...