How To Convert Backup Camera On 2013 Winnebago View To Observation Camera

Updated 02/05/2021 | Published 02/03/2021

Products Featured in This Question

Hook Probe Circuit Tester

(70)

$13.94

14 Gauge Primary Wire - Blue - per Foot

(51)

$0.61

Self-Stripping Connector with Waterproof Sealant - 14-18 Gauge - White and Blue - Qty 1

(46)

$2.22

Question:

I have a 2013 Mercedes-Benz Winnebago View is a wiring component available to have the existing backup camera activated for constant viewing when towing a car? Thank you

asked by: Bruce B

Expert Reply:

You can absolutely change the backup camera on your 2013 Winnebago View built on a Mercedes-Benz Sprinter for constant viewing and you won't need an adapter.

Since back up cameras are hooked to the reverse light wire which is what makes them only activate when you are backing up, you will need to find the power wire and hook it up to the running light circuit of your vehicle instead. This will allow the camera to be on any time the running lights of your View are on.

The easiest way to do this is using a circuit tester like the # PTW2993 to find the wire in your tail lights that has power when the running light circuit is turned on, and using a quick splice # SWC501746-1 to connect a new power wire to the camera. You will want to use # DW02414-1 which is sold by the foot to go from the running light wire to the backup camera.

expert reply by: Samuel C