Class 3 Trailer Hitch For A 1994 Buick Roadmaster Estate Wagon
Hi, Do you make a class III hitch for 5K pound capacity for a 1994 Buick Roadmaster Estate Wagon ? | Hi Daniel, nice car! We do have an option that may fit your 94 Buick Roadmaster Estate Wagon, but it doesn't look like there is a custom...
Recommended Equipment for Towing a Trailer with a 1993 Buick Roadmaster
I tow a 6x12 single axle trailer with my Silverado which has a 2 inch receiver class III hitch. I need a hitch for my 93 Roadmaster sedan Limited that has a 2 inch receiver but I do not see any Class III I do not need the load carrying ability...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Availability of Class III Hitch for 1996 Buick Roadmaster Estate Station Wagon
I have a 1996 Buick Estate Wagon. Looking for a class 3 receiver. Has to fit the wagon not sedan......thanks | We do offer a Class II hitch for the 1996 Buick Roadmaster Estate Wagon with a respectable 3500 lb towing/350 lb tongue weight capacity,...
Is There a Class III 2" Trailer Hitch Receiver Available For a 1995 Buick Roadmaster?
Do you sell class 3 hitch for 95 buick roadmaster with tow package? | The Curt Trailer Hitch Receiver # C12009 class II receiver is our only custom fit receiver for your 1995 Buick Roadmaster. There are a couple ways you can get to a 2" opening...
Recommended Trailer Hitch for 1994 Buick Roadmaster Estate Wagon
I have a 1994 Buick Road master wagon and have been searching for a class 3 trailer hitch without success. Im interested in possibly purchasing your Draw tite class 3 item#75676 which I noticed stated it May Not fit my wagon. My wagon is built...
Does a Trailer Hitch Mounted Cargo Carrier Require a Light Kit on a 1995 Buick Roadmaster Wagon
Do I need to have lights wired to my car 95 Buick Roadmaster wagon if the cargo carrier isnt wide enough to obscure the tail lights? | If the cargo carrier and the cargo loaded on it do not obscure the vehicle tail lights, you do not have to...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Differences Between Class II and Class III Trailer Hitches
What is the exact difference between a class 2 and class 3 hitch for a 1996 Buick Roadmaster Estate Wagon? Is it strength of materials or design or both? Can I purchase fabrication drawings and specification specifics from you? Any help...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Can Hopkins Trailer Wiring Kit Cause 1996 Buick Roadmaster Fuel Pump to Stop Working
I used this harness and on my 96 Buick Roadmaster Wagon and followed the instruction where to plug into which side and also attached the white ground. After install this causes my fuel pump to no longer work until I unplug it and plug the tail...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Factory Luggage Rack Capacity Buick 1996 Roadmaster Station Wagon
How much weight can the roof rack or carrier on Buick 96 station wagon Roadmaster hold with out damaging the roof? | I was lucky enough to be able to find a .pdf copy of the 1996 Buick Roadmaster Station Wagon owner's manual online. Buick states...
Trailer Hitch Recommendation for a 1994 Buick Roadmaster Estate Wagon
We have been looking for a while now to find a class III hitch for our 96 Buick Roadmaster. Would you know a class III hitch that fits? Or can be made to fit? It needs to pull a 1972 Airstream Argosy of -empty- about 3500 pounds. | We have a...
How Tight Should Compression Fitting # D13032 Be when Installing a Transmission Cooler
Hi guys! With regards to the compression fitting installation, can you please tell me how tight I should tighten the crush nut and the barb fitting. Do I need to go all the way until no thread is left? | Generally, you will tighten the fittings...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
What Gauge Wire is the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter # HM47180?
What gauge wire is used in the pigtail with #HM47180 | I went out to the warehouse and pulled the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter item # HM47180 off the shelf. The brake controller wire is 16 gauge the other...
Trailer Wiring and Brake Controller Recommendations for a 1996 Buick Roadmaster Estate Wagon
I am installing a traler hitch on the above wagon- questions are 1 wireless vs wired controller cost is not a total issue 2 is there an installation Kit for that wagon I suspect it would be the same as a Suburban 3 is the car pre-wired I...
Will the Thule Pulse XL Roof Cargo Box Fit on the Factory Crossbars on a 2011 Mercedes R350
Hi, I am planning to purchase the Mercedes Benz Basic Roof Rackinch for my 2011 R350. I would like a roof cargo carrier that will work with the Mercedes Benz rack. Will this box fit on the MB Basic Roof Rack?inch The MB Roof Rack has a channel...
Filter Your Search
Contact and Help