Result:

Articles

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Availability of Bike Rack for 85 lb E-Bikes

Im looking for an ebike rack to carry 2 ebikes. 85Ibs each. One of the bikes has a very long wheel base 54. I couldnt see what the maximum wheelbase was in the details section just that it was adjustable for the racks I looked at. Can you tell...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Best Trailer Wiring Harness for a 2007 Infiniti FX35

Is C56190 harness compatable with led taillight on my Infiniti tow vehicle. | Yes, the Curt Powered Tail Light Converter part # C56190 will work with LED tailights. Please note that your 2007 Infiniti FX35 could have came with either a separate...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel

I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...

Recommended Wiring Harness Confirmed to Fit a 2006 Infinity FX35

which trailer wiring kit fits 2006 infinity fx35 | For your 2006 Infinity FX35, we have the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This is a confirmed fit that...

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103

do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...

Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer

Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35

I own a 2010 FX35 and I am very interested in buying this product for my towing need. Before I do so, I would like to understand how visiable is this hitch when you install onto a FX35, is it invisiable or you can pretty much sees the hold thing...

Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103

I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Trailer Hitch for a 2012 Mercedes R350 BlueTec

Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...

Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103

Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI

Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...

Availability of Hitch for 2006 Mercedes R500

Does this fit a 2006 Mercedes R500? | We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements...