bing tracking image

Rodeo  x   >   RX350  x   >   Rabbit  x   >   XTS  x   >  

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Could Thule Force XT Fit Factory Crossbars 2015 Cadillac XTS

Hi. I dont have factory crossbars. Can I use any crossbars? Thanks | Yes the Thule Force XT Rooftop Cargo Box # TH6358B would fit the factory crossbars you have on your 2015 Cadillac XTX 5 door. | Yes the Thule Force XT Rooftop Cargo Box # TH6358B...

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Items Needed to Tow a Trailer with a 2011 Lexus RX350 Without Tow Package

I bought a 2011 RX350 Canadian version that was not ordered with the tow package. What do I need to install to properly tow our 2500 lb boat? | To tow your boat trailer with your 2011 Lexus RX350, you will need a trailer hitch, wiring harness,...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

How Hard is it to Install a Trailer Hitch on a 2013 Cadillac XTS

Need to know how much trouble to install hitch .I see no information for this installation. | The installation difficulty for Draw-Tite trailer hitch # 36538 for a 2013 Cadillac XTS is listed as a 5 out of 10. The scale is based on estimated...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

Will a Trailer Hitch Receiver on a 2013 Cadillac XTS Carry a 200 Pound Scooter

Have a 2o13 cadillac xts luxury am handicapped ,want to knoww if trailer hitch could accomodatre a drive on mobility scotter total weight of 200 lbs | Trailer hitch receivers to fit your 2013 Cadillac XTS, like the Draw-Tite # 36538, are Class...

How To Install Vehicle Wiring Harness Of 2013 Cadillac XTS

I have been trying to install a trailer wiring kit on my 2013 Cadillac XTS using a Curt 59190 wiring kit with no success. I cant get the lights to function properly, Im assuming this isnt compatible with my car? If it isnt, would wiring kit...

Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D

Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...

Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath

Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...

How to Install Yakima KingJoe Pro 3 Bike Trunk Rack on 2014 Cadillac XTS

I bout the Yakima kingdom pro 3 and have a 2014 Cadillac XTS. I asked someone already and they confirmed they were proper fits but I cant find the measurements for the fit anywhere. Please help. Thanks. | The Yakima KingJoe Pro 3 Bike Trunk-Mount...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo

This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...

Does Duton-Lainson Hand Winch # DL15103 Require Cable Fastener # DL24361 to Secure the Cable

With the above listed winch, do I also need to get item # DL24361 to secure the cable to the winch, or does this come with it. Thanks | Yes, you would need to get the Cable Fastener, # DL24361, to secure the cable to the winch. The winch will...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Filter Your Search