Thule Spare Me Rack on 2010 Rav4 with Back Up Camera
I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...
Bike Rack Recommendation for 2008 Infiniti G35 that Allows Rear Trunk Lid to Open
Hi, currently looking for a trunk mount for max 2 MTB Orbea Oiz on a 2008 Infiniti G35x. Ideally one that can stay on and allows trunk to open. Do you work with shops in the DMV area that install these? Thanks | Hey Kenneth, there isn't a trunk...
Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor
Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...
Availability of an A-Frame Coupler that is 45 Degrees and Not 50 Degrees
Is there an A frame coupler that is NOT a 50* angle? I have an older stock trailer and it needs like a 45*. | All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle,...
Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts
So, I noticed in the video the spring plate does bend when tightened. How much torque was used? This is normal on the spring plates? They should bend slightly? I freaked out after I noticed my bent. But this is how it should be? | Trailer...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Difficulty Hooking on Bottom Trunk Mount Bike Rack Straps to Truck or Hatch
Hello, my trunk is so tight there is not enough space for the hooks to fit at the bottom of the trunk lid for my 2007 Infinity G35. Attaching these hooks under the bumper is not an option because it is very soft and will pucker the bumper. I...
Recommended Weight Distribution System For Prolite S Camping Trailer
Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? Plese ASAP. Thanks | For your Prolite S camping trailer, I recommend the Reese Steadi-Flex Weight Distribution...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
What is the Weight of Hollywood Racks Sport Rider SE2 2-Bike Platform Rack # HR1450Z
How much does this bike rack weigh? We plan to use it with two different vehicles and ease of moving from one to another is important. We had the Thule Apex and it weighed 41#s which was OK. Does this weigh about the same? | The Hollywood...
How to Correct Sagging Class I Hitch and Bike Rack on 2006 Infiniti G35 Coupe
Wondering if it is possible to have someone weld a higher class hitch to the frame on Infinity G35 coupe? Is this possible? Have a class I now and it is sagging badly Thanks! | Trailer hitch makers generally produce hitches that are designed...
How to Tell if the Yakima SkyBox NX 16 Will Fit a 2006 Toyota RAV4
Will this box fit my 2006 Rav-4? It has a factory rack and cross bars. | Here is how you can determine if the Yakima SkyBox NX 16 Rooftop Cargo Box, # Y95AV, will fit your 2006 Toyota RAV4 and allow your rear hatch to open. Measure the crossbar...
Trailer Hitch and Ball Recommendation for 2005 Infiniti G35 Sedan
Hi i wanted to know I have a 2005 infiniti g35 sedan and I bought a small boat and i wanted to know what hitch do you guys recommend, and if you guys have 7/8 ball size. thanks | We do have the Curt hitch part # C11482 which you referenced that...
How Much Does the Thule Hitching Post Pro Bike Rack Weigh
I am wondering how heavy the bike rack is before I order it. thanks - | The Thule Hitching Post Pro # TH934XTR has a shipping weight of 41 pounds. The rack itself, minus the packaging, weighs about 38 pounds. I have linked a video review of...
Class II and Class III Trailer Hitches for 2016 Toyota RAV4 Hybrid
I am purchasing a 2016 Toyota RAV4 Hybrid and would like to know if the gas RAV4 hitch will work on the hybrid model as well. Thank you. | We can offer you either a 1-1/4-inch Class II hitch # C12108 or a 2-inch Class III hitch # C13149 for...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Hitch Recommendation for a 2004 Infiniti G35X Sedan
Hello,I have a G35X Infiniti 2004. Are the instructions for this video for the 2011 model the same for the 2004?Thank you, | The Curt Hitch part # C11482 that you referenced is designed to fit 2003-2006 Infiniti G35 Sedans, so it would not fit...
Compatible Trailer Hitch Receiver to Fit 2003 Infiniti G35 M6 Coupe
I just want to know if a trailer hitch is avalaible for my g35 2003 M6. | The Curt # C11483 is designed to fit your 2003 Infiniti G35 coupe. There is some drilling and fascia trimming to install it but all the necessary hardware is included....
Filter Your Search
Contact and Help