1998  x   >   Gen-Y Hitch  x   >   2015  x   >   !Equal-i-zer  x   >  

Can an additional receiver be purchased for this item? I’m looking to mount a winch on a receiver mount and a trailer ball at the same time. I would only use one at a time so I don’t need much overall strength. I just two individual hitch receivers...

Can I get a 2 5/16” ball on this type of adjustable hitch Thx | Actually the Gen-Y Bolt-On 2" Adjustable Receiver Plate # 325-GH-124 that you referenced does have a 2-5/16 inch hitch ball one of the sides. There's a 2 inch ball one one side...

Are you able to tow a trailer with this adapter? | The Blue Ox High-Low Adapter for Tow Bars # BX88235 is designed for lateral pulling like what we see with a flat-tow setup since the towed vehicle is supported on all 4 wheels. For your application...

Do they make one with a 4 inch drop. My xterra sits high and i normally use a 4 inch hitch for my popup | The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 does not come in any other drop. If you need...

I currently have a Vilano 325RL with MorRyde IS and MorRyde 1621HD Pinbox. The hitch is BandW Companion Fifth Wheel. The truck is a Silverado Crew Cab 3500 dually, with 8 foot bed. Since the installation of the IS, I am getting a lot of bounce...

Do you have a extra long trailer hitch ball mount with a 4 inch ? Like 15 inches pin hole to ball hole? Like: item # BH20 Or: Item # EBMK25318 Something similar with at least a 10K LB rating? Or do you make a 2 1/2 one for HS trucks that...

I pull a 4 place snowmobile trailer that weights 5000-6000 loaded is the torsion over kill or worth the purchase just wondering | The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1224 is built very strong but it will be a really...

I have a 2015 Chevy Suburban and want to add the torsion hitch and best sway / distribution accessories for best towing ability. Which part numbers do I need. Will be pulling a 24foot Haulmark ALX Aluminum Enclosed Race Trailer. | The Gen-Y...

Will this super hitch exstention with this hitch GEN-Y GH-623 MEGA-Duty Adjustable 6inch Hitch with GH-061 Dual-Ball, GH-062 Pintle Lock for 2.5inch Receiver - 21,000 LB Towing Capacity - 3,000 LB Tongue Weight? | Hi Wayne, The TorkLift SuperTruss...

Hello we have an Aluma car hauler that doesnt exceed 5000 lbs, and a short wheelbase 1/2 ton pickup tow vehicle. The trailer imparts motions to our truck that doesnt feel comfortable, so we would like to purchase a device to absorb the trailer...

I have the 16k torsion hitch. Is there a sway control that I can add? | The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1224 does allow you to use a weight distribution system with integrated sway control if desired. You would...

Can this be used with a weight distribution hitch | Yes, the Gen-Y Shank # 325-GH-503 for 2-inch hitches is plenty sturdy to allow use with any 2-inch weight distribution shank. Serious steel construction and both primed and powder-coat finishes...

Hello and looking for information on this set up. Im constantly removing my heavy 5th wheel hitch and this looks like the solution to me. Is there any anti chucking properties built in to this or is there another solution while using this hitch?...

Will the wandb wdh work with the boss torsion flex hitch from Gen-y? | Yes, the B&W Continuum Weight Distribution System item # BW78FR will work with the Gen-Y Torsion 2-Ball Mount item # 325-GH-1226. The Continuum has a tongue weight range...

Will the Gen Y Hitch Executive Pin Box Goose Neck adapter GY58GR work for our 2015 Keystone Cougar 279RKSWE 5th wheel trailer? We were told it has a 1621 bolt pattern. It is a Lippert brand. S/N 027-000038832 we believe, the label was painted...

Just purchased a 2022 Jayco Eagle HT 29.5 BHDS. Its still at the dealer, how do I determine which Reese Goose box to use? My tow vehicle is a gas 2015 F250 with a 6foot 9inch bed. I will be using a BandW turnball. I do not know the size of the...

Hello, I just put a 3” leveling kit on my 15 Sierra 1500. I have factory 265/70r 18’s and looking to get 35’s soon. What size hitch will I need? | To determine the correct ball mount for your 2015 GMC Sierra 1500 that has a 3" leveling kit...

I am shopping for a new 5th wheel and several dealers are telling me they cannot install a Gen-Y Gooseneck pin box as it will void the trailer warranty. They instead want to sell me a Reese Goosebox that I do not want. Can you comment on their...

Hello, I am exploring options on a trailer hitch for a 2015 Honda Accord. The purpose will be to transport two 80lb e-bikes. I have a bike rack picked out, the R Titan DUAL MOTORCYCLE & DIRTBIKE CARRIER 1,000 LB CAPACITY W/ RAMP, part 32201. All...

I have a 2015 f350 supercab 6-3/4 bed. I just ordered a Gen Y GY38FR from you. Will this work with my short bed? Do I need an offset ball or anything else? | That's really going to depend on your specific trailer. While the standard response...

Im looking to purchase a used 3L diesel vehicle with class IV tow hitch package. These generally tow about 7,000 - 8,000 lbs, which i understsand means they support a tongue weight of about 10 or 700-800 lbs... why is it that the class IV...

Do you carry the Gen y torsion hitch to replace the 1116 lippert pin box? | The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part # 325-GH-8045 can actually be made compatible with a Lippert 1116 Pin Box. That said, this...

I have a 2017 Jayco Toy Hauler that is triple axle, 19,000 GVWR, and apparently has a tongue weight of around 5000lbs. My question is, will the goosebox from Reese work or is my trailer too heavy and need the Gen-y gooseneck pin box. Thank...

I have a couple of questions I hope you can answer. We are towing a 15,000 lbs 40’ gooseneck trailer with 3500lbs weight on the ball, on rods covered with snow and ice 6 months of the year and we have a lot of steep hills as well. 1. During...