1998  x   >   Gen-Y Hitch  x   >   2015  x   >  

Which Gen-Y-Hitch is suited for my 2015 Jayco 310w toy hauler | In order to find the correct Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box for a Jayco Seismic Wave 310W you'll need to determine the pin box pattern. This can be...

Can an additional receiver be purchased for this item? I’m looking to mount a winch on a receiver mount and a trailer ball at the same time. I would only use one at a time so I don’t need much overall strength. I just two individual hitch receivers...

Im looking to purchase a used 3L diesel vehicle with class IV tow hitch package. These generally tow about 7,000 - 8,000 lbs, which i understsand means they support a tongue weight of about 10 or 700-800 lbs... why is it that the class IV...

I pull a 4 place snowmobile trailer that weights 5000-6000 loaded is the torsion over kill or worth the purchase just wondering | The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1224 is built very strong but it will be a really...

Do you carry the Gen y torsion hitch to replace the 1116 lippert pin box? | The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part # 325-GH-8045 can actually be made compatible with a Lippert 1116 Pin Box. That said, this...

I have a 2017 Jayco Toy Hauler that is triple axle, 19,000 GVWR, and apparently has a tongue weight of around 5000lbs. My question is, will the goosebox from Reese work or is my trailer too heavy and need the Gen-y gooseneck pin box. Thank...

I have a 2015 Dodge Caravan with an aftermarker hitch receiver 2inch that was installed be u-haul. I need a hitch adapter with with 10 rise and a 2 ball. I will be hauling a 19 ft aluminum fishing boat, and Im currently looking at 325-GH-315 Do...

Can I get a 2 5/16” ball on this type of adjustable hitch Thx | Actually the Gen-Y Bolt-On 2" Adjustable Receiver Plate # 325-GH-124 that you referenced does have a 2-5/16 inch hitch ball one of the sides. There's a 2 inch ball one one side...

Will the wandb wdh work with the boss torsion flex hitch from Gen-y? | Yes, the B&W Continuum Weight Distribution System item # BW78FR will work with the Gen-Y Torsion 2-Ball Mount item # 325-GH-1226. The Continuum has a tongue weight range...

requesting information compatible, first item # 325-GH-1301 Gen-Y Pintle Hook Mounting plate for 2-1/2 inch hitches 16-hole-21K . Question what WD weight distribution equipment is compatible with item # 325-GH-1301 for a smother ride and anti-sway...

whats the weight of this mount?does it really weigh 114 pounds? | Actually the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1325 that you referenced weighs 124 lbs. This ball mount weighs so much because it has a very high weight...

Can this be used with a weight distribution hitch | Yes, the Gen-Y Shank # 325-GH-503 for 2-inch hitches is plenty sturdy to allow use with any 2-inch weight distribution shank. Serious steel construction and both primed and powder-coat finishes...

Can any of the GenY torsion hitches be used with aHusky Centerline weight distribution system? | Gen Y makes cushioned weight distribution shanks that are compatible with Husky Centerline weight distribution systems like the part # GY54FR which...

Howdy. Id like to know if there would be any negative effects of installing of installing an over rated gen-y hitch on my toy hauler instead of the correct lower rated hitch. Based off of my trailers CGVW and tongue wieght my trailer requires...

On my 2015 Jayco seismic 310w toy hauler, Lippert pin box s/n 067-000008599, which hitch is good for me? | I reached out to my contact at Lippert and they were able to confirm that you have a Lippert 1621HD pin box therefore the correct Gen-Y...

Will this super hitch exstention with this hitch GEN-Y GH-623 MEGA-Duty Adjustable 6inch Hitch with GH-061 Dual-Ball, GH-062 Pintle Lock for 2.5inch Receiver - 21,000 LB Towing Capacity - 3,000 LB Tongue Weight? | Hi Wayne, The TorkLift SuperTruss...

Hello, I just put a 3” leveling kit on my 15 Sierra 1500. I have factory 265/70r 18’s and looking to get 35’s soon. What size hitch will I need? | To determine the correct ball mount for your 2015 GMC Sierra 1500 that has a 3" leveling kit...

Is using a Gen-Y Pin Box void the 5th Wheel frame warranty? | The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Boxes like part # GY58GR is not approved by Lippert no, but that doesn't mean you should not consider this for your trailer...

I have the 16k torsion hitch. Is there a sway control that I can add? | The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1224 does allow you to use a weight distribution system with integrated sway control if desired. You would...

Hello, I am exploring options on a trailer hitch for a 2015 Honda Accord. The purpose will be to transport two 80lb e-bikes. I have a bike rack picked out, the R Titan DUAL MOTORCYCLE & DIRTBIKE CARRIER 1,000 LB CAPACITY W/ RAMP, part 32201. All...

Do they make one with a 4 inch drop. My xterra sits high and i normally use a 4 inch hitch for my popup | The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210 does not come in any other drop. If you need...

Hello and looking for information on this set up. Im constantly removing my heavy 5th wheel hitch and this looks like the solution to me. Is there any anti chucking properties built in to this or is there another solution while using this hitch?...

Do you have a extra long trailer hitch ball mount with a 4 inch ? Like 15 inches pin hole to ball hole? Like: item # BH20 Or: Item # EBMK25318 Something similar with at least a 10K LB rating? Or do you make a 2 1/2 one for HS trucks that...

Trailer-Hitch-Ball-Mount/Gen-Y-Hitch/GY27VR Your video for this ball mount says you can adjust the by dropping the ball mount into one of the stacked receivers either right side up or upside down. It would help me to know with the ball mount...