2 Inch Hitch Needed to Carry 2 65-lb E-Bikes on 2015 Honda Accord
Published 02/17/2022 >
Products Featured in This Question
Question:
Hello, I am exploring options on a trailer hitch for a 2015 Honda Accord. The purpose will be to transport two 80lb e-bikes. I have a bike rack picked out, the R Titan DUAL MOTORCYCLE & DIRTBIKE CARRIER 1,000 LB CAPACITY W/ RAMP, part 32201. All I have seen for 2015 Accord is 1-1/4 hitches with max tongue weight of 200. That wont work for my application. Are there any other options?
asked by: Anthony G
Expert Reply:
Unfortunately, our manufacturers don't offer a 2 inch hitch for your 2015 Honda Accord.
If you can remove the battery packs and somehow get the weight of the bikes down to 65lbs each or less, we have a solution that would work for you.
You'd first need a Class I hitch like the # C11681 which has a 200 lb tongue weight capacity. For a rack, the Thule EasyFold, part # TH903202 can accommodate 2 bikes weighing up to 65 lbs each with tires up to 3 inches wide. For tires up to 4-11/16 inches wide, you can add the # TH985101 fat tire strap kit. You'll need one kit per bike.
Unlike most e-bike racks, the EasyFold can accommodate bikes with fenders, and is compatible with a 1-1/4 inch hitch receiver tube. This is the highest capacity rack we offer that's compatible with a Class I 1-1/4 inch receiver. The rack also features an integral loading ramp, a locking anti-rattle hitch pin and locking clamps that hold the bike in place to the rack. The rack has built-in rollers that makes it easy to transport the rack from its storage spot to the rear of the vehicle. The rack is fairly light at 45 lbs, so if you can get the weight of the bikes down to 65 lbs or less each, the combined weight of the bikes and rack will come in under the 200 lb tongue weight capacity of the # C11681 hitch.
I'll link to a demonstration video for the Thule EasyFold bike rack and an install video for the Curt # C11681 hitch.
Product Page this Question was Asked From
Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel
- Hitch Fabrication Parts
- Receiver Tube
- 12 Inch Long
- Raw Finish
- Fits 2 Inch Hitch
- 7/16 Inch Thick
- Gen-Y Hitch
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is 2006 Nissan Xterra Manual Transmission Flat Towable
- Q&A: Dimensions of the Gen-Y Weld-On 2 Inch Receiver Tube
- Q&A: How To Stop A-Frame Jack From Scrapping Ground While Going Over Bumps
- Q&A: Which Hubs Fit the # TRU37FR Spindle
- Q&A: How to Find Replacement Hub for Mobile Home Axle
- Q&A: Where Is Brake Controller Install Wiring for 2021 Chevy Suburban
- Q&A: Why Do Hitch Extenders Reduce Hitch Capacity but Long Ball Mounts Do Not
- Article: How to Choose the Right Trailer Hitch Class
- Article: What Jeeps Can Be Flat Towed?
- Article: Trailer Tire Sizing
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation on a Ford Full-Size Van



