Does the B&W Continuum Weight Distribution System Work w/ A Gen-Y Torsion Ball Mount?

Updated 02/19/2025 | Published 03/05/2023

Products Featured in This Question

B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW

(175)

$1299.00

Gen-Y Torsion 2-Ball Mount - 2" Hitch - 2-1/2" Rise/10" Drop - 16K

(138)

$819.95

Question:

Will the wandb wdh work with the boss torsion flex hitch from Gen-y?

asked by: James S

Helpful Expert Reply:

Yes, the B&W Continuum Weight Distribution System item # BW78FR will work with the Gen-Y Torsion 2-Ball Mount item # 325-GH-1226. The Continuum has a tongue weight range of 600 lbs - 1,600 lbs so you will be limited to 1,500 lbs of tongue weight with the Gen-Y Torsion 2-Ball Mount. It tops out at 1,500 lbs and you always want to go off of the lowest rated component.

expert reply by: Jerred H

Ian

2/15/2025

Has this been tested? I was interested in the gen y wdh version, but was advised they aren’t compatible together, and this was the route to go. Just curious how combing the two affected towing. Thanks.

Jerred H.

2/17/2025

@Ian I am not sure if they have been tested together. Where did you hear that they are not compatible?

Ian

2/17/2025

@JerredH from Gen y. This was the answer I got. “The way the continuum is hooked up it would not be able to connect to our shank properly. The male end for the continuum is on the wrong side to be used with our shank”