1998  x   >   !Glacier  x   >   Fastway  x   >   2019  x   >  

Looking at the Fastway e2. My tongue weight is 680 dry. I expect that it may end up near 750. The RV weight will be no greater than 7500. Is the 800 lb e2 hitch the correct size? | Ideally when choosing a weight distribution system you want...

Hello, am considering these onestep chocks. They look and sound great, but am wondering how its possible to install on both sides of trailer when one side needs to be raised on leveling blocks. In the real world, I yet have to find a side...

We have a 10,000 pound hitch set up with the 1,000 pound bars. Can we purchase just bars that are a step up in weight class with our current hitch assembly or does it require a new one? | The highest-rated round bar Fastway Weight Distribution...

So I have this hitch, moving it to a F250, confirming I can use the 2 1/2inch to 2inch sleeve in my F250 receiver 2 with this hitch which will not change the strength or quality operation? Do I have to use a certain brand of sleeve. Thank...

Moving WD hitch from a F150 to a F250. can I just use a Sleeve Adaptor or do I need to replace shank? | To use your 2-inch weight distribution setup in a truck that has a 2-1/2-inch hitch you can either add a reducer sleeve like # C45405 or...

i installed a curt 17600 distribution hitch on a 2019 silverado 1500 with the max tow package. GVWR = 7300 GCWR = 17800 MAX PAYLOAD = 1946 GAWRR = 4150 MAX TONGUE WEIGHT = 1210 CURB WEIGHT 5354 My added payload to pickup is about 900lbs ...

I have a 2019 Chevrolet Traverse and recently purchased a 2019 Keystone Passport 171EXP hybrid trailer. The trailer has a tongue weight of 410 lbs and a GVWR of 5200 lbs. I havent taken it out on the road yet to try it out with just a hitch...

2014 F150 fx4 trailer with 610 hitch weight Using a 1000 hitch Is there a minimum amount of washers ? I cant get the bars parallel with the frame at 5 washers. The bars are a lot lower in the front at hitch and rest on the front of the rear...

I Just purchased this with the tow package included. It has rear load leveling suspension. Does this mean I would not need a weight distribution kit? Also has a class IV receiver hitch. I attached a picture of the other parts that are included...

Will be towing 19’ Airstream trailer with max loaded wt of 4500 lbs . Need system recommendation please. | The one important thing to consider when choosing a weight distribution system is actually the tongue weight of your loaded trailer. Typically,...

I have an e2 hitch rated for 600 lb tongue weight for a Starcraft 17RB Comet trailer. I am getting a larger RV a Grand Design 23BHE. Can I buy new bars to up my capacity to 800 lb or even 1000 lb capacity without swapping out any other components...

will this work well with my truck and whats the warranty ? | The Fastway Self-Locking, Adjustable 2-Ball Mount, Stainless Balls - 2.5" Hitch - 8" Drop/9" Rise # DTSTBM6825-2S will work well on your truck assuming the rise/drop and capacity fits...

Can the ball assy. be inverted and stored under the hitch towards the front of truck? Can it be purchased with just 1 ball for clearance? My Ram 2500 is 24.5inch to top of hitch, top of trailer coupler at level is 16.5inch Concerned hitch might...

I have a Fastway E2 trunnion WDH rated for 450 pound tongue weight. Can I just replace the spring bars for a heavier trailer? | You are going to need to replace your entire hitch with either the 6,000LB # FA92-00-0600 or 10,000LB # FA92-00-1000...

Still wanting to know if this replaces similar REESE bar of same weight. | The Replacement Round Spring Bar # FA94-02-0899 cannot be used in a Reese weight distribution hitch. Most of the Reese weight distribution systems do not offer replacement...

I have a Fastway distribution hitch that I need to replace the ball on. Its a 2-5/16 ball with a 1-1/4 shank and is around 2-5/8 long. What would be your recommend for a replacement ball, thanks | For a 2-5/16 inch hitch ball for your Fastway...

I have a 24foot 10k enclosed car hauler that i need a weight distribution hitch. I am unsure of the tw on the trailer but my tow rig is an 2019 silverado 2500hd that does have a 3inch leveling kit. The truck pulls the trailer just fine, however...

I currently have the E2 1k distribution hitch and will be buying another smaller trailer Winnebago Micro Minnie 1808fbs The UVW is 3760, GVWR 5000 and unloaded hitch weight is 390. Looking at other customer questions, I believe I can buy the...

I need a new key for my locks. Key code 311. How can I get new keys? Thanks | Hi there Joyce. Thanks for the question and it's pretty easy to get key 311 for your Fastway coupler locks. All you have to do is order the following and you're...

I am ready to purchase but don’t have enough experience or desire to install the system...my trailer sales place only installs systems they sell. I need an easy to operate system for me to apply alone. I’m not the strongest person so I need...

I bought anew 2021 Forest River Wolf pup 18 TO. What # will fit my trailer? It weighs 3797#, and tongue wt is 437#. Thank You, | The correct Fastway e2 Weight Distribution System for a 2021 Forest River...

Checking to make sure I will be able to swap out the pre-installed 2 5/16 ball to a 2inch ball that my trailer requires. I am a first time tower using my 2019 Grand Cherokee Trailhawk 4x4 with a V8 5.7 Hemi. My trailer length is about 26.5foot...

Im planning on towing a camper less than 4000 lbs and my vehicle has a tow capacity of 6000 lbs. Do i need a weight distribution hitch ? if so which one do you recommend. | Yes, when towing a trailer with a weight over half that of the tow...

What is the best weight distribution/ sway pairing for a truck with a hitch height of 21.25 inches and a 2019 jayco flight slx 195rb trailer with a coupler height of 18.5 inches. | I would be happy to recommend a weight distribution system with...