Troubleshooting Fastway e2 Trunnion Hitch Sway Bars Angled On Sway Brackets

Updated 07/14/2022 | Published 07/05/2022

Products Featured in This Question

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(172)

$650.00

Replacement Sway-Control L-Bracket for Fastway e2 Weight Distribution Systems - 6,000 to 12,000 lbs

(102)

$57.17

Question:

2014 F150 fx4 trailer with 610 hitch weight Using a 1000 hitch Is there a minimum amount of washers ? I cant get the bars parallel with the frame at 5 washers. The bars are a lot lower in the front at hitch and rest on the front of the rear l brackets.

asked by: Ron M

Expert Reply:

There are not a minimum amount of washers that you will need for the Fastway e2 Weight Distribution #FA92-00-1000. The Sway-Control L-Bracket # FA93-02-5150 can be adjusted along with the link plates to position the brackets so the bars ride flat on the brackets. This will ensure that the parts are not easily damaged by only having contact on the edge of the L-Bracket.

expert reply by: Bud M