Search: kwikee   >   Fishing Rod Holders   >  

If your Kwikee Steps #LC3711363 all of a sudden aren't operating correctly on a nearly brand new motorhome then my first recommendation would be to check the wiring for any damage or loose connections and then test the ground and the 12v…

The towing capacity for a pickup like your 2017 Ford F-250 Diesel 4X4 depends on all of the factory equipment installed, including engine, cab style, transmission and rear differential. You are correct that a hitch may be rated for more or less…

I would love to help but in order to make sure we get the exact wheel stud you need for your 2013 Ice Castle Trailer we are going to need a bit more precise measurements. In order to find these precise measurements you will need a digital caliper…

Hopkins 7-way/4-Pole Vehicle Connector kit #HM40975 consists of the 4-and-7-way connector, a mounting bracket and hardware. No relays are included since this kit is intended for use on vehicles equipped with a factory 7-way tow package. The similar…

The correct linkage you need for the Kwikee step you mentioned is the part #LC369488. For replacement parts beyond that you'd need the part #LC369529 which is a motor, gear and table replacement.

The correct replacement step for your 28 Series Kwikee step with the part 902809025 is actually listed as part #LC3747453 on our site. If you are just needing the replacement frame for this step it is part #LC3747457 while the replacement step motor…

The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents #MA10-04301K-V16 is the upgraded circuit board from what you sent in a picture of (4201). This will still work for you and will give you a more reliable board.

The replacement circuit board for your MaxxFan 4201 Series is the Replacement Printed Circuit Board and Switch for MaxxFan 4301 Series Roof Vents #MA10-04301K-V16. The 4201 series circuit boards may look different compared to the upgraded circuit…

Though the design is slightly different you can use the Camco Horizontal 2-Stage Propane Regulator #CAM59323 in place of the Cavagna Model 524AS 2-stage regulator. I have linked a video review of this regulator for you.

I reached out to Dexter and they no longer make that axle. I can confirm based on the bearing sizes you gave that you have a 3,500 lb capacity. If you determine you just want to replace the hub, I recommend the Trailer Hub and Drum Assembly for…

It does sound as if your controller is causing the issue. The correct replacement for your Kwikee 909510000 step control is Lippert part #LC379146.

The Replacement PowerGear RV Above Floor Slide-Out Motor #LC368417 is the correct motor to replace the 130-1204G you currently have.