Search: Trailer Stabilizer Jacks   >   !RV Sinks   >   RV and Camper Bike Racks   >  

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have…

You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

No, you can't. I contacted B&W this morning and was told they do not sell the components of their tow and stow ball mounts separately. While you are most likely correct and they are probably interchangeable, B&W wants you to buy a new…

The ETrailer stickers are only on our branded products or on the specific product in the picture/video. So you would only see an ETrailer sticker if you bought one of our manufactured products. Your Phoenix Faucets Catalina RV Tub and Shower Diverter…

Yes. We only put the stickers on for the pictures we take to identify them as our pictures. The ones you receive would not have the stickers. Unless you want them on there!

The distance from the top of the shank to the bottom of the platform on the B&W Tow & Stow 3-Ball Mount part #BWTS10048B while in the stowed position is 8-1/2". I am not sure where you were measuring from but if you measure from the top…

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…