Recommended Two Speed Trailer Winch For 6500lb Boat.
I have a 6500# boat. Looking for a 2 speed winch. Pls advsie | For your 6500lb boat I highly recommend the Jif Marine 2-Speed Trailer Winch # 315-W3200D which has 2 speeds like you were looking for, and the 3200lb capacity will be plenty to...
How To Determine Fit of the 3,200 Lb 2-Speed Boat Trailer Winch
I presently have a Phoenix bass boat riding on a Marine Master trailer. It has a 1400lb winch now and I would like to replace it with a 3200lb. My question is the mounting bolt hole pattern the same, will it bolt right up ? I dont want to have...
Recommendations On Dock Bumpers For A Wahoo Aluminum Boat Dock
Are these the dock bumpers used on a Wahoo Aluminum Boat Dock? | The Jif Marine Dock Bumper - 23-1/2" Long x 10-1/4" Tall x 1-1/4" Thick - Black Plastic # JIF57VR are a universal fit and will be the exact same as what came on your Wahoo Aluminum...
Recommended Hand Crank Trailer Winch and Jack for 6K Boat
I have a 6000-pound boat, but the trailer does not have rollers. It has carpeted bunks. The boat is 25 feet in length and has twin small block Chevy engines. What winch would you recommend, and I would be more than happy to purchase one a little...
Will Jif Marine Underdeck Tritoon Ladder Fit 2011 Godfrey Tritoon Boat
I have a Godfrey 2011 tritoon boat I’m wanting to order a 5 step or 4 whichever works front ladder that slides under the front u have the JIF ladders my front is curved which ladder will work for me?? Please I’m in desperate need of answers??...
Winch Recommendation for Boat Trailer with 6,000 lb Boat
Can you tell me what type of hand winch I need for 6,000 lb boat? | Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good...
Dimensions Of The Mounting Brackets On Sliding Under Platform Pontoon Boat Ladder 315-FOG3
What are the dimensions for the mounting brackets. Need to understand the footprint required for mounting. Thanks | I attached a diagram that shows the various dimensions of Sliding Under Platform Pontoon Boat Ladder - 3 Steps - 34-1/2" Tall...
Recommended Mounting Screws For The Jif Marine Telescoping Boat Stern Ladder # JIF35FR
What size screws are recommended to attach the Jif 4 step ladder? Thanks. | The mounting holes of the Jif Marine Telescoping Boat Stern Ladder # JIF35FR are 8mm in diameter. The type of screw you would use for these holes depends on the application....
Replacement Motor Support Toggle For Old Transom Saver
I need to replace a motor support toggle, may be two on my transom saver because a rubber piece fell out of the support. My saver is 20 years old. Will your product replace the original one? | The Replacement Motor Support Toggle for Jif Marine...
Replacement Pontoon Fence Bolt Kit part # JIF28VR Stainless Steel Grade
Which of the STAINLES STEEL GRADES ARE THEE ELEVATOR BOLTS MADE OF ? Thanks Rod | Hey Rod, the stainless steel grade of the Replacement Pontoon Fence Bolt Kit part # JIF28VR that you referenced is 304. |
Recommended Replacement Winch For A Fulton T2605 Hand Winch
I have a t2605 two speed boat trailer winch by Fulton I believe. The crank arm and or the shaft is stripped. I found the crank arm but can I buy just the shaft? | The winch you reference has actually been discontinued as well as the replacement...
How Deep Are The Cupholders On This Boat Table 315-DSI-KF
How deep are the cup holders? The ones on our boat table are so shallow the drinks tip over. | I've gone ahead and pulled the Octogon Boat Table # 315-DSI-KF from our inventory to measure for your specific question. There is a depth of 2-1/4...
Recommended Replacement for Valley Industries 2-Speed 2,800 lb Winch
I’m replacing a 2800 lb Valley 2 speed on ez loader carrying 25’ farallón around 12,000lbs Cable or strap ? And what winch has the best brake? | The 2-Speed Boat Trailer Winch part # 315-W3200D would be an excellent option to replace a Valley...
Width Of Top Mounting Surface On Jif Marine Dock Edging # JIF56VR For Mounting Hardware
How wide is the top over hang on the jif dock edging? How much space between screws? | The Jif Marine Dock Edging # JIF56VR has a 1-1/4" overhang for the top of the dock edging. I recommend securing the edging every 12" both on the top and...
What Are The Bolt Specs Of The Pontoon Deck Bolts
What is the size of the bolt? 1/4-20, 5/16-18 ?? only the length was listed. Thanks | Per the manufacturer The Replacement Pontoon Deck Bolts - Stainless Steel - Qty 4 # JIF58VR are 1.5 inches by 1/4-20 inch, with a 1 inch round flat head...
Replacement Bunk Carpet, Winch, and Transom Tie Down for Boat Trailer
Im looking to replace everything on my trailer from the bunk carpet the winch and the transom tie downs and just need some expert advice. The boat is 21ft and weighs 4,000lbs. The trailer is a tandem axel trailer and weighs about 1,200lbs....
Operation of Brake on JIF Marine 315-W3200D 2-Speed Boat Trailer Winch
Does the brake on the # 315-W3200D apply ON/OFF or will it DRAG to let the strap out continuously and slowly? | The brake is strictly an On/Off proposition. When it's in neutral, the strap can be pulled out easily without the handle turning...
Recommended Winch for a 3,500 lb Boat with Carpeted Bunk Boards
I have a 23foot ft boat that weighs approx 3,500 - 4,000 lbs. w/ Carpet covered bunks. Is this sufficient ? Or Can I use a 2,000 lb winch ? | I spoke to the manufacturer Jif Marine, they informed me that the 2-Speed Boat Trailer Winch with...
Does Ladder Come Out at Angle For Jif Marine Underdeck Pontoon Ladders JIF45FR & JIF75FR
Hi, I like what I see for the JIF45FR-4 step or JIF75FR-5 step ladders. Trying to understand which would work on my pontoon boat. Couple questions: 1.When the ladder is pulled out of the base and hooked/locked, is the ladder perpendicular...
Will Jif Marine 5 Step Underdeck Pontoon Ladder Fit Between 22 Wide Arms On Pontoon Scissor Trailer
Good morning. Can I use this with a scissors trailer that has a 22in. space between the lifting arms? | Yes, the Jif Marine Underdeck Pontoon Ladder for Flat Decks - 5 Steps - 59" Tall - 300 lbs - Aluminum # JIF75FR will sit inside of the lifting...
Recommended Boat Trailer Winch for a 4000 Pound Boat
I have a 20 ft. Grady White with a 150 Yamaha outboard. I estimate the total weight including gear and fuel to be around 4000lbs. My trailer is a roller trailer. will this winch appropriate for this boat? Id also appreciate a recommendation...
How To Install the Sliding Under Platform Pontoon Boat Ladder
Hello: Your boat ladder videos seem helpful for sales however they are useless for helping install your ladder. Forgive me for being direct. At the end of last season I bought the JIF 2-step / platform which came without installation instructions....
Availability of 3,200 lb Winch that Uses a Wire Rope Instead of a Strap
Do you have a 315-w3200d with a cable instead of a strap? | We have a Dutton Lainson winch part # DL15440 which is very similar to the JIF you mentioned as it's a 3,200 lb capacity, 2-speed winch but we don't have a JIF version that has the...
Replacement Suspension and Winch Parts for CE Smith Multi Sport Trailer
One of my leaf springs broke. Can you tell me the replacement parts I would need to replace the leaf springs on both sides, replace axle and hubs, and change from 8 to 12 inch tires w/wheels. I would also like to upgrade the winch stand...
Filter Your Search
Contact and Help