!Oldsmobile  x   >   Pacer Performance  x   >  

Do I need this on my 2014 gmc sierra 1500 or is there a chmsl wire close by to use. Thanks | In the wiring harness that runs to your 2014 GMC Sierra 1500 there should be a CHMSL circuit wire in the bundle that you can use for the third brake...

I have a 2010 Ford Ranger to which Ive added a leer camper shell with a third brake light. What do I need to correctly wire this. The Ranger has combined brake tell and stop on a single bulb. | The 3rd Brake Light Logic Module part # PP20-702...

Do these lights have two wires? I have a fiberglass cab and I need pos. and neg. wires for each light. | The Pacer Performance Hi-Five Truck Cab Lights # PP20-205 has two wires, the white wire is the ground and the red wire is the positive wire....

I have a 2006 silverado with cab lights from factory. I would like to know if these will mount in the factory positions/holes that are already there? I dont want to have to drill new holes. I am wanting to change from an amber light/lense...

What are the lumens are theled bulbs? An what is the purpose of the incandescent bulbs. The picture shows round base bulbs an the info said T10 wedge bulbs. Which is it? | Each of the LED bulbs that come with the Pacer Performance Hi-Five LED...

are the lights i am ordering fit the top of the 2002 dodge cab with no change for screws etc.? | The Pacer Performance Hi-Five Truck Cab Light Kit - Dodge part # PP20-245 are not a direct fit replacement for factory cab lights. They are designed...

Wedge light does it come in red? | The only wedge/teardrop style lights I can find in red are going to be Truck Cab Light Kit # PP20-215. The lights are 4-5/8" long x 2-1/16" wide x 1-3/4" tall and come as the set of 5. Since they are 12 volt,...

hello.found your 5 light set, clearance light kit online. own a 1948 Ford F-5 truck with those lights mounted on the cab, above the windshield of my old truck. 6 volt of course. need either new 6 volt lights, or, new insides for 12 volt lights....

I added a shell to the truck, but when the installer connected the center mount brake light on the camper, he connected it to the left side brake light. Now the center light flashes when the left turn signal is on. What can I do to have the...

I have a small trailer from harbor freight that I pull behind my gold wing I have a flat 4 pin connector off bike I want to run a high up 3rd brake light plus my normal 2 lights on trailer do you have a wiring harness that will do all of that...

I just bought a Leer topper and installed it on my pickup. I want to use the 7 way that’s installed in the bed of my truck to provide constant 12v to the dome light and also power the 3rd brake light. How can this be accomplished and how exactly...

Are these led or incandescent? | Clearance Light Kit # CB-15AK has incandescent lights. For LEDs I recommend # PP20-206. Either kit includes wiring and a switch as well as mounting hardware. |

How to hook up a brake light on my 2019 Dodge Ram? Can. You help? | You can use the third brake light module part # PP20-702 to get a dedicated brake signal from either your trailer wiring or the vehicle wiring. Since the stop lights and turn...

Im installing a cap on my 2023 Ford Maverick Lariat. Do you have anything that will allow me to plug in a connection for the third brake light without splicing? My Maverick has a four pin conector for the trailer hitch. | What you would want...

I was hoping you could give me mounting hole dimensions for Pacer Hi5 cab lights product# 20-221S. Thank you | The mounting holes for the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-221S are 4-1/8" from center to center. |

How to wire brake light on cap useing plugin 7 pole | The easiest way to use your vehicle's 7-way trailer connector to power up the third brake light on your truck cap is to first locate the right and left turn signal wires behind your 7-way....

I am re wiring my trailer and looking for advice. I am wanting to install rock light or curb lights above my axles to turn on when I use the turn signal. I am trying to find a way to use the turn signal on the trailer as a continuous signal...

What color is the led bulb for this item, clear or amber. Pacer Performance Hi-Five LED Truck Cab Light Kit - Tear - 5 Piece - Amber LEDs - Amber Lens | The LED lights that come with the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-206...

how dark are the lens covers? if you google this product the image from other sellers is of a lighter lens cover. Are they a dark red like you picture? | I'd be difficult to quantify 'how dark' the lenses are. I did a Google search of the lamps,...

Im trying to wire up my 3rd tail light on my leer camper shell. I tried doing it off the driver side tail light wiring but no matter what I do it cause the 3rd brake light to blink when using the driver side signals. So I googled how to wire...

The Thinline LED Trailer Tail Light has three functions but only three wires with white for ground. Splain that to me Lucy. Thanks | The Thinline LED Trailer Tail Light part # STL64RB is a three function light with those functions being stop,...

I have a 2019 Chevrolet 2500 hd with duramax engine I add m going to be putting on a leer truck cap . If I buy a fifth wheel 7 pin connector for that plugs in th o existing 7 pin bumper connector then run it up and mount it into bed then to...

I want to add a LED 3rd brake light to my incandescent 4 wire trailer. Will the Vehicle to Vehicle Tail Light Converter Item # 118158 work for me? | I have a solution for you, and you could use the Vehicle to Vehicle Tail Light Converter #...

I have a new F150 2022 ford Lightning truck. I put a topper pop up camper on the Lightning and I need to connect the brake light on the topper to the truck. Is there a harness I can use that plugs into the back of the trailer harness? I am considering...