Do the Pacer Performance Hi-Five Lights # PP20-205 Have Two Wires for Each Light

Published 07/21/2016

Products Featured in This Question

Pacer Performance Hi-Five Truck Cab Light Kit - Teardrop Style - 5 Piece - White Bulbs - Amber Lens

(262)

$70.89

16-14 Gauge Butt Connector - 5 Pack

(33)

$3.95

Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads

(10)

$9.26

Question:

Do these lights have two wires? I have a fiberglass cab and I need pos. and neg. wires for each light.

asked by: John

Expert Reply:

The Pacer Performance Hi-Five Truck Cab Lights # PP20-205 has two wires, the white wire is the ground and the red wire is the positive wire. The white wire must be grounded to a clean metal surface and the red wire will run to the power source or switch. If you want to wire several of these to the same circuit, then all of the red wires will splice into the positive wire going to the power source or switch and all the white wires can either be grounded individually or spliced together and grounded in one location.

I recommend using the Deka Heat Shrink Butt Connects # 05731-5 when connecting your spliced wires. I also recommend the Pollak Light-Duty Toggle Switch # PK34513 for turning your lights on and off.

I have attached a diagram of how the lights should be wired and labeled the function of each wire for your convenience.

expert reply by: Sarah H