Can I Still Use The JackRabbit Retractable Tonneau # 311-JRC1329 Without Having a Locking Tail Gate?
my Tail gate does not lock I dont carry anything in there will it still be OK if tailgate does not lock | Yes, you can still use the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC1329 on your 1971 GMC C/K pickup with the 6'...
Correct Trailer Hitch for a 1972 Chevy C10/K10 Stepside
72 chev stepside 1/2 short bed | Are you asking if the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 will fit your 1972 Chevy C10/K10 Stepside? If so then yes, this trailer hitch is a confirmed fit according to Draw-Tite. I checked...
Rear Suspension Enhancement Recommendation For 1996 GMC K2500 With Truck Camper
I have a 1996 gmc 2500 4x4 extended cab with a heavy 10’ overhead camper these helpers would have to be down tight under pressure all the time Pressure. Will They lift the back of truck up apx 1 1/2” to 2”. Also will i louse travel making...
Replacement Tarp for Extang Black Max Soft Tonneau
WILL PT#EX5940 TONNEAU COVER FIT RAIL SYSTEM ON 1992 CHEV CK1500 STEPSIDE P/K W/6.5inch BED. IF NOT, ADVISE CORRECT PART #. | I do have an option for you but the Replacement Cover for Extang FullTilt Vinyl Tonneau Cover with Snaps # EX5940 replaces...
4 Inch Wide 24 Inch Long Nerf Bar Step Pads
i am looking for replacement step pads for a set of Bully nerf bars they are about 24inches long and 4 inches wide | These Replacement Step Pads are for Westin Nerf Bars # 21-0001 but are 4 inches wide and 2 inches long. They have tabs on the...
Heavy Duty Trailer Hitch Fit for 1989 Chevy K1500 Pickup
I bought a Curt 15511 last year and could not get it to mount on my 1989 Chevy k1500 short and narrow bed 4wd stepside pickup. Id like advice on the correct direct fit bolt-on HD hitch for my truck. Also ... it would be VERY helpful if somewhere...
Aries Grille Guard For 1992 Chevrolet C/K Series Pickup Truck
I am in need of a brush guard brackets not sure the brand of brush guard | I am unable to provide the correct kit for you due to the fact that the mounting hardware is specific to the vehicle and the brush guard itself and we do not have that...
Recommended Trailer Hitch for 1997 Chevy C3500 with Service Body
Needing to know what hitch I can install on a 1997 C3500 Chevrolet truck with a Knapheide utility body. I have not measured yet, but guessing I need a hitch for a 10 inch bumper? Thanks, | I do have some great trailer hitch options for a...
Front Mount Trailer Hitch for Using Plow on 1998 Chevy Silverado 4x4
I have a Meyers plow I am wanting to install this front hitch mount on my 98 Chevy Silverado reg cab 4x4. And Fab my plow to just slide into the receiver. Do u see a reason not too | Adding a front mount hitch like the Curt # 31042 to your...
Why Isn't There a 2-5/16" Hitch Ball Available with a 3/4" Diameter Shank
Help please, ...I dont understand! I have three holes in the bumper of my Chevy C1500 LB pickup for mounting hitch balls. The holes are for 3/4 in. dia. shanks. I have a 2 in. one mounted, and I need to mount a 2 5/16 in. one as well. But Im...
Help Identifying Puck System In A Used Truck
Hi, I just bought a truck with some sort of hitch in the bed. It is missing the part you put into the bed to couple to a trailer. I was hoping I could send a photo and you could help identify what it is? Thank you | Hey Cameron, that looks an...
Recommended Trailer Hitch Receiver For 1995 GMC Sierra K1500
I was looking at purchasing a hitch receiver for a new to me 1995 GMC Sierra k1500. On your website the top listed receiver hitch curt class IV said it was only compatible with a 18” or smaller spare tire. Do you have anything available that...
Wiring Kit For Installing A Brake Controller On a 1997 Chevrolet C/K1500 Truck
1997 Silverado 1500 Extended cab Will this kit fit the aforementioned truck? If not, do you have a complete kit for this make and model? | The Curt Universal Installation Kit # C57186 is universal and will work on your 1997 Chevrolet Silverado...
Heavy Duty Trailer Hitch that Fits 2000 Chevy Silverado 3500 Cab and Chassis
Hello I am looking for a trailer hitch for a 2000 Chevy 3500 cabin chassis Dooley truck I believe it will accommodate the 34 inch wide rail to rail of the frame like a normal 3500 but I do not want the bolted version I would like the welded...
Troubleshooting Tekonsha Voyager Brake Controller part # 39510 with No Brake Output
1990 chevy pickup tenkosha voyager contoler have no power at blue wire,with brake pedal or with manaul control, all other check okay,bad controler or does the truck have to be in motion? | The manual override lever of the Tekonsha Voyager Brake...
Trailer Wiring Harness for a 1994 GMC C/K Series Pickup Truck
I was looking for 1994 GMC Sierra trailer wiring harness with 4 pole flat trailer connector. I can only find the it for 1994 GMC c/K series pickup on your website will this work on the Sierra also? | In 1994 the Sierra was just a trim level...
Trailer Hitch Receiver Option For 1990 Chevy C2500 With Roll Pan Bumper
Hi i need to find a hitch that fit my chevy 1990 c2500 truck whith - Roll Pan Bumper whit hole in. what did you have..? | There is a single potential option for a hitch fit on your 1990 Chevy C2500 with a roll pan bumper, from Draw-Tite: -...
Recommended Trailer Brake Controller And Wiring Needed To Install On a 1996 Chevrolet Silverado 1500
Will it work on my 96 Chevy Silverado 1500 | The Pigtail Harness # 7894 will allow you to wire in your Draw-Tite Activator brake controller on your 1996 Chevrolet Silverado 1500. You will need a Universal Installation Kit for Trailer Brake Controller...
Will Aries Round Nerf Bars Fit 1978 GMC Sierra
Do these fit on a 78 GMC Sierra 4x4 | The Aries Round Nerf Bars # AA204037-2 are designed to fit the 1978 GMC C/K Series with a regular cab. As long as your Sierra has the regular cab these will fit your truck. If you have the crew or extended...
Recommended Draw-Tite Trailer Hitch Receiver For 1969 Chevrolet K10 Pickup
I have been looking at your website for a trailer hitch and narrowed it down to draw tite 41947 or 41938. I have a 1969 chevy K10 it looks like the 41947 provides a better fitment. can you give me your best recommendation for my model. |...
Trailer Hitch and Wiring for a 1965 Chevy C/K Series Pickup Short Bed
Will this part 13028 fit a short bed 65 Chevy c-10 pick-up. I notice that it only lists a long bed. | I checked with Curt and they do list trailer hitch # 13028 as a fit for all models of the 1965 Chevy C/K series pickups as long as they do...
Does the Curt Clamp-On 2 Bike Rack Need Additional Stabilizing Straps
Does the rack need to be fastened or strapped to prevent it swaying back and forth as you drive | The Curt Clamp-On 3 Bike Rack, part # C18013 does not require any additional straps for stabilization while carrying bikes. If you would like...
Will Spare Tire Stay in Place Using Draw-Tite Trailer Hitch 41947 on a 1986 Chevy K30
will the spare tire stay under the truck on my 1986 chevy k30 | We have not had anyone complain about not being able to keep the spare tire on when installing Draw-Tite trailer hitch # 41947 and it is also not specified in the instructions,...
Recommended Underbed Gooseneck Hitch for a 1993 Chevrolet C/K Series Truck
will this kit fit on a 1993 chevy 1 ton? | I have a solution for you but the Curt item # C60652 will not fit your 1993 Chevrolet C/K Series truck. Instead you will want the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation...
Filter Your Search
Contact and Help