Can the Yakima BackSwing be Used with Other Brand Bike Racks?
Will the Yakima backswing work with my Kuat 2” Transfer 1? My rack weighs 25 lbs so it’s very light and I carry only 1 bike with me. | The Yakima BackSwing # Y02483 will work with any bike rack that has a 2 inch shank. Unfortunately, it cannot...
Parts Needed to Connect the MB Sturgis Regulator # 108221 to a 1991 Coleman Sun Valley
Hi, Im wanting to replace the 2-stage 11wc regulator on my 1991 Coleman Sun Valley pop-up as it appears to be very old. Apparently the current regulator is not original and the original part has been discontinued. My current regulator is mounted...
Parts Needed to Add 4-Pole Flat Trailer Wiring Harness to 2010 Mitsubishi Outlander
To whom it may concern. I have a 2010 Mitsubishi Outlander that has a square connector for the trailer lights. However, my trailer has the standard 4-flat. Do you carry an adapter that would connect the two? Thank you. Best regards. | It sounds...
Trailer Hitch Recommendation for a 2016 Mitsubishi Outlander
i am getting different answers about this hitch.i need 2 know 4 sure if it is a sure exact fit 4 a 2016 Mitsubishi Outlander?thanx, | I checked with Curt and the hitch part # C13163 that you referenced has been confirmed as a fit for your 2016...
Recommended Hitch and Bike Rack for 2018 Mitsubishi Outlander SE
Hello I am condsidering purchasing the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2inch Item # C13163 for my 2018 Mitsubishi Outlander SE. I would like to attach a bike tow. Could you recommend one which is compatible to this tow...
What is Needed to Tow a 2013 Mitsubishi Outlander Behind an RV
Can be towed on dolly behind and a RV | The Roadmaster Tow Dolly # RM-2050-1 will definitely be the suggestion I would make. That being said, this is specifically for the front wheel drive models. If you have an all wheel drive model however,...
Making the Connection Under the Hood of a 2011 Mitsubishi Outlander for Trailer Wiring
When I removed the battery and looked for the under hood harness, I found a black connector, not a grey one. It fits, but is it the correct connector? | The connector under the hood of your 2011 Mitsubishi Outlander may not be gray. All indications...
2010 Mitsubishi Outlander Roof Rack and Kayak Carrier Recommendation
My car already has the tracks or channels running the length down the top of the roof. I want a rack bar system that fits into the channels that might be used with the Rhino-Rack Nautic Kayak Lifter. What do you suggest as the best, strongest,...
Recommended 205/75R14 Tire Replacement for Camper Currently Using Bias Ply Tires
We recently bought a used camper that has ST205/75 R14B tires on it that need replaced before we can use it. What would you recommend? | I recommend the Kenda Karrier ST205/75R14 Radial Trailer Tire - Load Range C # AM10234. These Kenda tires...
Will Yakima RocketBox Pro 14 Roof Mount Cargo Box, # Y07192 Fit a 2010 Mitsubishi Outlander
Will the Yakima Rocketbox 14, fit on my 2010 Mitsubishi Outlander. The long bars are closer together at the back of the car 39 and we have the antenna in the middle of the car at the back. I have the Thule rack thanks to you and I know it will...
Availability of Roof Rack and Roof Rack Rails for a 2003 Mitsubishi Outlander
I need to put the roof rack rails for my Mitsubishi Outlander 2003, do u have any one for me, im buy it without Roof Rack and I need it. Thank you, i hope your answer soon, if u got picture about this Roof Ill apreciate it, | The Rhino-Rack...
Correct Selection of Roof Rack Systems for a 2019 Mitsubishi Outlander Without Roof Rails
Hi, my 2019 Outlander - roof has 4 fixed points remove plastic cap and u see a locking mechanism- no rails..I am to choose the option no existing rails for this scenario, correct? | That is correct. In our roof rack fit guide for your 2019...
Which Way Should Air Inlet Face on Air Bags for 2012 Mitsubishi Outlander
A quick follow-up to my previous question-still about a 2012 Mitsubishi Outlander. The Firestone instructions state that the airbags should be installed with the air inlet facing down, and yet every video you guys do has the inlets facing up. It...
Size of Bolts Needed to Install Trailer Hitch in 2009 Mitsubishi Outlander
do u now the bolt size for Towing Package for 2009 Mitsubishi Outlander | The needed bolts to install the Curt hitch part # 13581 in your 2009 Mitsubishi Outlander are included but the size of them is 1/2 -13 x 1-3/4. |
Correct Wiring Harness For 2020 Mitsubishi Outlander PHEV
Hello! I ordered the Curt 56412 Custom Wiring Connector that has Mitsubishi Outlander PHEV 2018-2020 on the packaging. I cannot get it to work properly. Is this because its the wrong harness for my vehicle? Is the C77KR a different product?...
Replacement Anode Rod Options For a RV Water Heater
will this work on the winnbego spirit 22m? or what rod do I need? | The correct Anode Rod is going to be determined by what water heater you have. Unfortunately, your motorhome information does not tell me what water heater you have. The rod...
What is Purpose of Tie Down Loops on Curt Hitch # 13581
What is the tie down loop for? | On the Curt hitch part # 13581 that you referenced the two loops you mentioned are for safety chains from a trailer. Safety chains are designed to prevent the trailer from becoming totally disconnected in the...
Trailer Hitch that Fits 2019 Mitsubishi Outlander Non-PHEV
Hello is this fit on 2019 Mitsubishi outlander non phev?? Or the regular outlander? | We have the Curt hitch part # C13163 that fits your 2019 Mitsubishi Outlander non-PHEV but the # C13398 only fits the PHEV models. |
Recommended Trailer Hitch for Bike Rack On 2016 Mitsubishi Outlander
Im looking for a trailer hitch for a 2016 mitsubishi outlander sel. What is your recommendation. Well be using it for a bike rack. | The Curt Trailer Hitch Receiver part # C13163 is what I recommend for a 2016 Mitsubishi Outlander (Except PHEV...
Trailer Hitch for 2018 Mitsubishi Outlander PHEV
Does it fit on 2018 Mitsubishi outlander phev? | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is # C13398. This will work well for bike...
Will Curt Class III Trailer Hitch # C13398 Fit 2018 Mitsubishi Outlander PHEV
Curt advertises model #13398 as a hitch that fits the Outlander PHEV however, in a recent response you stated there was no suitable hitch for the PHEV? Will this model work? | The Curt Class III Round Tube Receiver Hitch # C13398 referenced...
Trailer Hitch Wheelchair Cargo Carrier for 2010 Mitsubishi Outlander
I have a 2010 mitsubishi outlander and was wondering can you tell me what type of wheelchair carrier is best for my vehicle.thank you | I have attached a link to all of our cargo carrier with ramps that will fit a 2 inch hitch receiver. I...
Trailer Hitch Receiver and 4-Way Wiring Harness For a 2023 Mitsubishi Outlander PHEV
Will the Curt Trailer hitch #C87WR fit a 2023 Mitsubishi Outlander PHEV? | For your 2023 Mitsubishi Outlander PHEV you will need the Curt Trailer Hitch Receiver # C86FV. This has a different mounting bracket on the passenger side of the frame...
Recommended Parts for Towing with a 2022 Mitsubishi Outlander PHEV
I am looking for a trailer hitch for my 2022 Outlander PHEV. all the models you carry say not recommended for a PHEV. need to carry a 800 pound trailer. also need lights kit. thanks | For your 2022 Mitsubishi Outlander PHEV you'll want to...
Filter Your Search
Contact and Help