Which Battery Terminal Do I install Black Wire Of Curt Trailer Adapter On My 1991 Ford
The black wire is to be connected to the battery as a power source, via a fuse, should i connect this black wire to the red positive terminal or the black negative terminal? | Per instructions when installing The Curt Trailer Connector Adapter...
Stromberg Carlson 100 Series 5th Wheel Tailgate for a 1989 Ford F-250
Will this tailgate fit a 1989 F250? | For your 1989 Ford F-250 you want to use the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100 instead of part # VG-97-100 as the part that you referenced fits newer models Ford pickups. Attached...
Fifth Wheel Rail Kit for 1990 Ford F-250 and Where to Locate Rails in Bed
What kit to mount on a1990 f250 xlt lariot the one we got a few months ago a universal seems to far back on bed we have a long bed Went by instructions for mounting like 21 3/16 not sure information gonefor mounting just dont seem right | For...
4-Way Trailer Wiring Replacement Recommendation for 1986 Ford F-150
I have a 1986 f150 and the connector for the tail lights broke from corrosion. I am wondering if this is the part I need in order to reconnect my trucks tail lights to the harness connector that runs from the cab to the bed. | For a 4-way trailer...
What Gauge Wire is Used on Tekonsha Brake Controllers?
On the Tekonsha controllers, what gauge wire do they use? Mine is all 10 gauge under the truck but it would be pointless if the controller only uses 14 gauge. Also I have an older brake controller that some one has cut off the flat plastic...
Solution for Front Mount Hitch on 1986 Ford F-150
do you have front hitch to fit 1986 ford f150 | The only option for a front hitch on your 1986 Ford F-150 is a universal hitch like the Draw-Tite # 41990-07. Unfortunately, nobody makes a custom fit front hitch for your truck. This is a Class...
What Camper Tie Downs are Needed on a 1991 Ford F-250 with 10' Truck Bed Camper
Will these work for a 1991 Ford F250 and a 10foot camper that hangs over the end of the truck about 2? | I have a solution for you but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are designed to be used with truck bed campers up...
How to Pick Out a 5th Airborne Pin Box for a Trailer
I have a 2013 Flagstaff Fifth Wheel 8528TBWS and was wondering what Reese 5th Airborne pinbox would fit my camper? | In order to determine what Fifth Airborne your 2013 Flagstaff Fifth Wheel 8528TBWS would need you would first need to determine...
Will Curt Universal 5th Wheel Trailer Hitch Installation Kit fit a 1988 Ford F-250 SuperCab Long Bed
Curt 5th wheel hitch installation kit 16100 and16200 work in my 88 ford f250 supercab w/ 8ft bed using hitch 16115 ? | According to the installation instructions, see link, for Curt installation kit # C16100 or # C16200, it will fit Ford F-150...
5th Wheel Hitch, Base Rails and Install Kit for 1989 Ford F-150
Im getting a 5th wheel hitch with curt 16104 rails, what installation kit would I need for an 89 ford f150 8ft bed. Thanks | We have the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200 as there are no custom brackets available...
Drill Bits Required for Installing Curt Class V Hitch C15300
I am installing a c15300 hitch on my 1989 ford f 250. I have to drill holes to install. What type of bit should I use. | To install the Curt Class V XD Trailer Hitch Receiver # C15300 on your 1989 Ford F-250 you will need two sizes of drill...
Parts Needed To Add a 7-Way For a Brake Controller To a 1989 Ford F-350
I’m needing a complete hardwire trailer brake 7 way kit for a 89 f350 and I am having trouble finding the complete kit. Any help would be greatly appreciated | In order to add a 7-way trailer connector to a 1989 Ford F-350 you will need to...
Can I Use Timbren Axle-Less Suspension On My 19' Equipment Trailer
I have a 19ft equipment trailer with twi axles. Can i replace them with two sets of the timbren axless spindles? | The Timbren Axle-Less Trailer Suspension # A20RS545 can absolutely be used for a tandem axle application. Adding a pair of these...
Will Hopkins Tailgate EasyLift Fit 1991 Ford F-150 Pickup Truck
does the hopkins tailgate easy lift fit my 1991 ford f150 4x4 lariat xlt tailgate? | The Hopkins Tailgate EasyLift, part # 74211 will fit your 1991 Ford F-150 if your truck is not the SuperCrew model. This assist reduces the weight of a 30...
Correct Grease Seal for Trailer with L44649 Outer and L68149 Inner Bearing
Hi, Im trying to find the correct grease seal for my boat trailer. The outer bearing is L44649 and the inner bearing is L68149. The grease seal doesnt have any markings that I can find. The outside dimension is 2.327 and inside is 1.662....
How to Use the RBW Lil Rocker 15K 5th Wheel Hitch on a 1984 Ford F-250 with an 8 Foot Bed
I am looking for a mounting kit and rails for a RBW Lil Rocker 15k to mount to my 1984 f250 long bed heavy 3/4 ton diesel. | The RBW Lil Rocker 15K 5th Wheel Hitch uses industry standard rails (ISR) therefore I recommend using the Demco Installation...
Appropriate Replacement Transmission Cooler for 1987 Ford F-250 4X4 With C-6 Transmission
what is a good replacement cooler for a 1987 f-250 4x4 with c-6 tranny | Transmission and oil coolers are not vehicle-specific so you can use the largest one that will fit in the available space you have to mount it. You can start by measuring...
Trailer Running Lights Do Not Work After Adding 4-Way to 7-Way Adapter on 1991 Ford F-350
hook up existing 4pole too 7 pole and 4pole but can get no running light, help 1991 ford f350. | The first thing you are going to want to do is unplug the 4-Way from the 7 and 4-Way so you can test it. You will need a circuit tester # PTW2993...
Will Hopkins Tailgate EasyLift Work On 1991 Ford F-150 Supercab Lariat XLT
does the hopkins 74211 tailgate easy lift fit a 1991 f150 4x4 supercab lariat xlt | The Hopkins Tailgate EasyLift, part # 74211 will fit your 1991 Ford F-150 if your truck is not the SuperCrew model. This assist reduces the weight of a 30 to...
Is the Included Mounting Hardware Required to Install Westin Fey Surestep Bumper # 21002-92230
Will this bumper mount to the existing factory brackets on my 1988 F150, or do I have to use the supplied mounting kit? | To install the Westin Fey Surestep Rear Bumper with Custom Installation Kit # 21002-92230 on your 1988 Ford F150 you will...
Front Mount Trailer Hitch for a 1989 Ford F-150 to Mount a Winch
Is there a front receiver available for a 1989 Ford F-150 4x4? Is there one that can be easily modified to fit my truck? I want to be able to use a winch up front when needed. Thanks. | I do have a possible solution for you, but there are currently...
Universal Base Rails for 1991 Ford F-150 and Reese 14K Classic 5th Wheel Hitch
I was given a Reese 14k classic fifth wheel hitch to put in my 91 f150 but wasn’t given the rails is there a universal rail and hardware kit I can use with the pre-existing holes | We do have the Reese Universal Base Rails and Installation Kit...
Recommended Snowplow and Custom Brackets for 1985 Ford F-250 4WD
Looking to purchase the k2 rampage II Snowplow K2RAMP8219 for my 1985 Ford F250 4WD. What custom brackets do I need to mount on my trucks frame for installation. | The Custom Mounting Brackets for Detail K2 Snowplows # K281516 is the correct...
Has Correct Track Been Updated and Wet Bolt Kit to Use with It
I may be missing this but is this an upgraded version of the original correct track?? Is there a weight rating? I have a 2020 Sprinter Campfire 32fwbh that rides nose high hooked up to my 2017 f350 srw. Is there a kit that include heavy duty...
Filter Your Search
Contact and Help