Single E-Track Anchor for E-Track Tie-Off Ring # 59131
Can you tell me where on your site I can find the slot that the individual used in this photo to put the ring into? | In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a...
Installation Hardware for CargoSmart X-Track on Plywood
I will be mounting this X-Track on a 15/32 sheet of pressure treated plywood on the wall in my garage. What screws would you recommend I use and how many? | CargoSmart actually has a hardware kit designed for their tracks like the 5' Long Horizontal...
Hardware for Attaching E-Track to Wood Floor and Walls
I have an aluminum ATC trailer that has wooden floors and siding. I want to put Etrac down on floors and some of the side walls. Wood is 3/8” thick. What type of screws do I need? | Since you have wooden floors in your trailer the hardware I...
What are Dimensions of Snap-Loc Single-Slot E-Track Bolt-On Tie-Down Anchor # SLSS
What are the dimensions of the EM59148. Can I install them on the inside V of a US CARGO TRAILER to use for extra tie downs? | The Snap-Loc Single-Slot E-Track Bolt-On Tie-Down Anchor # SLSS measures 5-3/4 x 1 x 1/2 inches. These single-slot...
How Wide of a Strap Can Be Used with the Loc-Hook for Snap-Loc E-Track Tie-Down Straps Part # SLAHI
In your review and description you say that this will accommodate a 2 inch strap but every other website, including Snap-Loc, says it will only fit a 1 1/2 inch strap. Can you please clarify? Is this a different hook or hard they are dimensions...
Dimensions Of Snap Loc Panel Cart Conversion Kit SLADBPC319-P
hello im looking for the dimensions for the Panel cart/Pushcart conveversion kit item #SLADBPC319-P, CAN YOU HELP ME WITH THOSE? | I reached out to Snap Loc and they were able to give me the overall dimensions of the # SLADBPC319-P which are...
Troubleshooting Broken Latch on 2000 Model Exiss 4 Horse Trailer
Hi, I own a 2000 model Exiss 4 Horse trailer. The latch on the dividers is made of plastic, the part that attaches to the wall of the trailer. I have one that is broken and another that looks like it will break soon. I can not seem to find...
Dolly Recommendation for Moving Generator Around without Wheels
I am looking for something wheeled that I can put my Powerhouse PH2100Phi generator to allow me to wheel it rather than lift it. Do you carry something like that? | You could put your Powerhouse generator on a moving dolly like the part # SL1500DR319-P...
Can Snap-Loc E-Track Tie-Down Strap Work With Erickson Horizontal E-Track
I like the Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2inch x 8foot - 1,467 lbs code SLLS28RER. Can it be used with Erickson Products? Specifically their Erickson Horizontal E-Track - Zinc Coated Steel - 6,000 lbs - 5foot...
Will the Snap-Loc Loc-Ring for E-Track Part # SLARI Work with Ford Box Tie-Downs
Will these work with Ford box link | I spoke to my contact at Snap-Loc and they informed me that the Snap-Loc Loc-Ring for E-Track Tie-Down Anchors part # SLARI will indeed work with the Ford Box Tie-Downs you have in your 2017 Ford F-350. I...
How Many Holes Get Drilled to Install the CargoSmart Wheel Chock # 3481731
How many holes are needed to mount on the trailer? | According to the installation instructions you will use 4 attachment points when installing the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires Item # 3481731...
What are the Measurements of the Flat Part of the Foot Plate on Pro Series 2K Pipe Mount Swivel Jack
Im sorry if this is a duplicate - Im not sure the last attempt went through. Could you please tell me the dimensions of the footplate on PS1401060303, outside and inside non-curved part? Im am looking at attaching a plate caster with 6inch...
How Long is the Fixed End of Snap-Loc E-Track Tie-Down Strap SLLS28CER
How long is the fixed end length? | I went out to the warehouse and pulled a Snap-Loc E-Track Tie-Down Strap # SLLS28CER to measure the fixed end. The overall length is 9-1/2 inches. If measuring from the end of the buckle though it is shorter,...
E-Track And Tie-Down Strap for Securing Ladder on Inside Wall of Enclosed Utility Trailer
Want to secure a ladder to inside of an enclosed trailer. I have the brackets that the ladder sits on but wanted to secure it to a horizontal etrax above and below the ladder. I was considering part SLLS28CER but it will obviously have a twist...
E-Track Ratchet Straps to Secure Various Diameter Pipes in an Enclosed Cargo Trailer
Im buying a 7 X 16 enclosed cargo trailer and I need to buy a bunch of e track ratchet straps to secure dozens of steel pipes ranging from 6inch OD X 36inch tall to 12inch OD X 60inch tall. I want to stand the pipes in a vertical position against...
Erickson E-Track Straps for Enclosed Trailer Transporting ATV
My Enclosed trailer has two rows of front to back etrack already installed. Can I use the straps with my existing track and not use the provided chocks? | If you already have four E-Tracks mounted to the floor of your enclosed trailer and you...
Type of Fastener for Installing Snap-Loc E-Track Tie-Down Anchor SLSS
Good morning, Im thinking of buying the snaploc single etracks. My question is what type of self drilling screw do I use ? I notice I cant use nut and bolt with Washer on the side of tail gate. Thanks | The Snap-Loc E-Track Tie-Down Anchor...
E-Track Parts to Secure Side By Sides and Dirt Bikes
I have a 24ft trailer. I primarily use the trailer to haul 2 side by sides and 1 or 2 dirt bikes. I want to set the trailer up so it is safe and easy to secure my load. It is a 10,000 lb trailer so it is capable of hauling a car. I want to make...
Availability of Blue Ratchet Strap to Fit E-Tracks
Are you able to make this in a different color? Blue, grey or black? Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop - 2inch x 8foot - 1,467 lbs Item # SLLS28RER | We have a similar blue E-track ratchet to the part # SLLS28RER...
What is the Proper Orienation for Installation of Snap-Loc E-Track Tie-Down Anchor
Proper orientation for maximum strength? | The Snap-Loc E-Track Tie-Down Anchor # SLSS will have the same break strength and safe working load limit no matter what the orientation is when installed. The maximum load (break strength) is 3,000...
Will the Motorcycle Wheel Chock Work with the Front Tire on a 2006 Harley Sportster 883
I have a 2006 Harley Sportster 883. The front tire measures about 4 inches in width. Will the TWSPWM work with this tire? I also have a 2009 Honda Rebel and the front tire measures 3.75 inches. Will it work with that one also? Thank You |...
How to Set Up E-Track on Trailer Floor For Transporting 2 Motorcycles on Trailer
I need to know what placement on the floor of a 7 by 12 trailer to put the e tracts down. To haul one or two motorcycles. | There are so many variables involved here, including the size of the bikes, how you want them to sit in the trailer,...
Availability of Removable Wheel Chocks For ATVs To Mount on Trailer Floor
I am interested in purchasing 4 atv wheel chocks. I would like to make them quick disconnect for I use my trailer for many uses. 1. Do you sell the attachment plate ? 2. Do your wheel chocks accommodate a 8inch wide atv tire? Thank you...
Does Rack Em Manufacturing Removable Wheel Chock # RA-17 Include the Base Assembly
Does this come with the base | Yes, the base portion of the Rack 'Em Manufacturing Removable Wheel Chock # RA-17 is included with the chock. The base installs with user-supplied hardware (8 fasteners are needed) and the chock can be easily removed,...
Filter Your Search
Contact and Help