Does Taylor Made PWC Bumper Fit Kawasaki Jetski Ultra 310 SE
Will these fit a Kawasaki Jetski Ultra 310 SE? | Yes, the Taylor Made Personal Watercraft Fender # 3691069 does fit your Kawasaki Jetski Ultra 310 SE. |
Where on Boat Should Bimini Top Tracks Install
Can the slide tracks work mounted on inside of boat because I want the bimini to fit inside of boat and not on gunnel. My question is this system strong enough to hold bimini when opened up on water. or what other system can i use?? | Bimini...
Do the Gas Shocks Come With Mounting Hardware Included
Does the strut come with mounting brackets and ball or do you have to buy those separate? | A gas strut like the Gas Shock - 80 lb Force - 20" Extended, 11.41" Compressed - Black Nitride # 372-2300-80 is designed to replace an existing strut...
What Is The Compressed Length Of The Taylor Made Gas Strut 3691868-30
What is the compressed length of this gas strut? The description says it is a 15 strut, I assume thats extended Taylor Made 3691868-30 | The compressed length of the Taylor Made Marine Gas Strut # 3691868-30 is 9". |
How Wide/Thick is the Taylor Made Roll-In Dock Wheel
What is the measurement thru the hub? Need to know how much axle is needed to mount this wheel. Thz | I spoke with Taylor Made about the Taylor Made Roll-In Dock Wheel part # 3691224 and they informed me that the wheel is 7-3/4" thick. Therefore,...
Recommended Windshield Snaps for a 2023 Caymas DV20 Boat
Need snaps to install a windshield protector on a 2023 Caymas DV20 boat. | For your 2023 Caymas DV20, I recommend taking a look at the Taylor Made Top-Lok Windshield Snaps for Canvas Covers # 3691344 or the Taylor Made Top-Lok Windshield Snaps...
Stroke Length of Taylor Made Marine Gas Strut 3691871-60
Can you please tell me the stroke length for this gas shock ? Taylor Made 1871-60** Thanks | I reached out to the manufacturer, Taylor Made, who was able to tell me the stroke length of the Taylor Made Marine Gas Strut for Boat Hatches # 3691871-60. They...
Does The Pavement Ends Replace-A-Top For Suzuki Samurai Come With Tinted Windows Or Can I Tint Them
Can the Bestop #B5136109 for my 1986 Samurai come with tinted windows or can they be tinted? THX | I contacted our representative at Bestop, and she informed me that there is not a top that comes with tinted windows for your 1986 Suzuki Samurai....
Will a No Drill Windshield Channel Work on a 2000 Jeep Wrangler with Bestop Full-Length Bikini Top
I know that the regular bikini top for my 2000 wrangler 52530 is compatable witht he DRILL-IN windsheild channel 51210 but it is also compatable with the non-drill 51238?? Thanks! : | If you have the 52530 Bestop Full-length Strapless Bikini,...
Pavement Ends Flip Top Availability for YJ Wrangler
Hi, I have been trying to source a replacement top for my 92 YJ which currently has a pavement ends flip top. I have not been able to find it anywhere, but your site shows it as available. | We do have the Pavement Ends Flip Top that fits...
How is the Pavement Ends Cargo Cover Installed on a 1989 Jeep YJ
Does it lay flat,or do you have to have the soft top bows Under it? Im looking for one that doesnt need to have the bows under it! Dont run them in the summer | Yes, the Pavement Ends Cargo Cover will lay flat and does not use soft top bows...
Replacement Strut for Husky Toolbox
I need one 14 1/2inch extended and its 9inch closed?? It has like 5/16 pivot ball it snaps and locks into. 1/4inch or 5/16inch ???? | I may have a solution for you, but the # UWSLIFTCYLIND going to be the longest tool box strut that we have...
Are the Pins Sold Separately for the Taylor Made Ball-and-Socket Deck Hinge
can you order just the PINS with the STRAP ? | No, I am sorry you can not. The pins that come with the Taylor Made Ball-and-Socket Deck Hinge item # TM68YR you were looking at are not sold individually. Not sure what you meant by a strap....
Dimensions of Taylor Made Turn Latches for Boat Windshields
How wide are these latches on the base? I need those for a 1999 Moomba Outback LS. The original ones are 1 3/4inch wide at the base. I would need latches that are 2 - 2 1/8inch wide at the base. Please let me know. Thank you | The Taylor Made...
Do You Cut Tabs on Both Stacked SeeLevel Sensors SE88VR
SEELEVEL SENSORS 710-AR When stacking the sensors do you have to cut the tab on both sensors or just one? | Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long # SE88VR you just cut the top...
Availability Of A Replacement Neoprene Cover For The Rotomolded AM24NR Boat Fenders
I asked, can you buy the neoprene covers only?inch Without the fenders! And everyone said Yes you can buy the fenders separately. So several answered that Yes I can buy the fenders separately! | I am sorry for the confusion. We do offer a neoprene...
Timken Bearings for Trailer with Inner Diameters 1.06 and 1.375 inch
I need a timken trailer bearing kit for 1.062inch and 1.375inch diameter axles. The axles step down in size. I need bearings for two axles and brakes and drums 10inch diameter drum for one axle. Cant find quality parts and I dont know part numbers....
How Thick Is The Flange On The Taylor Made External Eye Ends for 3/4" Bimini Top Poles?
I am looking for a 3/16inch thickness, but I can only find 1/4inch thickness | The Taylor Made External Eye Ends for 3/4" Bimini Top Poles # 36911705 have a flange that is 1/4" thick. This is the same with all our Taylor Made Bimini Top Parts....
Replacement Hatch Strut for Stabilus STX29-100 on 2012 Crownline 285 SS Bow Rider Boat
Will this product replace the gas shock on the back hatch of a 2012 Crownline 285 SS Original Part: Stabilus STX29-100? | From what I've been able to determine, the existing struts you have are 36 inches long and provide 100 lbs of compression...
Mounting Hole Size Needed for Taylor Made Adjustable Handles for Boat Side Windows
my boat is a 1986 Starfire 225 SantaCruz. This is just like the one on my Boat but your adjustable handle said it needs a hole in the glass at 3/8 mine is smaller about 5/16 or 19/64 is there another size that is smaller for the window hole...
Do the Taylor Made Bimini Top Aluminum Slide Assemblies Have Locks in the Track
When the Bimini top is up in use, does the slide lock in place, or does it move around? Worries about the top sliding forward or back while under way. Thank you. | There are not track locks on the Taylor Made Bimini Top Aluminum Slide Assemblies...
Does Taylor Made Stow N Go Dock Box Come With Mounting Hardware
does this attach to dock with mounting kit? | The Taylor Made Stow N Go Dock Box # TM77VR doesn't come with any mounting hardware or a mounting kit. As is it's designed to sit on the dock. If you wanted to secure this to your dock you would...
Can Hitch be Installed with Pavement Ends Rear Bumper PE4591101
With the end of pavement rear bumper with hitch, can you tow a 4’ x 7’ utility trailer ? | The replacement rear bumper # PE4591101 has about the same height (6 inches) as the stock bumper on a 2012 Jeep Wrangler Unlimited. This means you can...
Does the Taylor Made Solar Powered LED Warning Light Have a Steady On Mode
Is there a version of this light with a bird spike? Also is there a constant on setting for this or only flashing options? Would also be interested in a bouy light like this with a remote control on/off controler. Just need to this light to...
Filter Your Search
Contact and Help